[PATCH v4 00/10] qcom: add support for PCIe0 on SM8450 platform

STALE1699d

Revision v4 of 4 in this series.

16 messages, 3 authors, 2021-12-18 · open the first message on its own page

[PATCH v4 00/10] qcom: add support for PCIe0 on SM8450 platform

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:58:55

There are two different PCIe controllers and PHYs on SM8450, one having
one lane and another with two lanes. This set of patches adds support
for the first PCIe phy and controller only, support for the second PCIe
part will come later.

Changes since v3:
 - Fix pcie gpios to follow defined schema as noted by Rob
 - Fix commit message according to Bjorn's suggestions

Changes since v2:
 - Remove unnecessary comment in struct qcom_pcie_cfg

Changes since v1:
 - Fix capitalization/wording of PCI patch subjects
 - Add missing gen3x1 specification to PHY table names

----------------------------------------------------------------
Dmitry Baryshkov (10):
      dt-bindings: pci: qcom: Document PCIe bindings for SM8450
      dt-bindings: phy: qcom,qmp: Add SM8450 PCIe PHY bindings
      phy: qcom-qmp: Add SM8450 PCIe0 PHY support
      PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg
      PCI: qcom: Add ddrss_sf_tbu flag
      PCI: qcom: Add SM8450 PCIe support
      arm64: dts: qcom: sm8450: add PCIe0 PHY node
      arm64: dts: qcom: sm8450: add PCIe0 RC device
      arm64: dts: qcom: sm8450-qrd: enable PCIe0 PHY device
      arm64: dts: qcom: sm8450-qrd: enable PCIe0 host

 .../devicetree/bindings/pci/qcom,pcie.txt          |  21 ++-
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml      |   2 +
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts            |  14 ++
 arch/arm64/boot/dts/qcom/sm8450.dtsi               | 143 ++++++++++++++++++++-
 drivers/pci/controller/dwc/pcie-qcom.c             |  88 ++++++++-----
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 125 ++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h                |  33 +++++
 7 files changed, 388 insertions(+), 38 deletions(-)



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 01/10] dt-bindings: pci: qcom: Document PCIe bindings for SM8450

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:58:58

Document the PCIe DT bindings for SM8450 SoC.The PCIe IP is similar
to the one used on SM8250. Add the compatible for SM8450.

Signed-off-by: Dmitry Baryshkov <redacted>
Acked-by: Manivannan Sadhasivam <redacted>
---
 .../devicetree/bindings/pci/qcom,pcie.txt     | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index a0ae024c2d0c..73bc763c5009 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt

@@ -15,6 +15,7 @@
 			- "qcom,pcie-sc8180x" for sc8180x
 			- "qcom,pcie-sdm845" for sdm845
 			- "qcom,pcie-sm8250" for sm8250
+			- "qcom,pcie-sm8450" for sm8450
 			- "qcom,pcie-ipq6018" for ipq6018
 
 - reg:

@@ -169,6 +170,24 @@
 			- "ddrss_sf_tbu" PCIe SF TBU clock
 			- "pipe"	PIPE clock
 
+- clock-names:
+	Usage: required for sm8450
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"         Auxiliary clock
+			- "cfg"         Configuration clock
+			- "bus_master"  Master AXI clock
+			- "bus_slave"   Slave AXI clock
+			- "slave_q2a"   Slave Q2A clock
+			- "tbu"         PCIe TBU clock
+			- "ddrss_sf_tbu" PCIe SF TBU clock
+			- "pipe"        PIPE clock
+			- "pipe_mux"    PIPE MUX
+			- "phy_pipe"    PIPE output clock
+			- "ref"         REFERENCE clock
+			- "aggre0"	Aggre NoC PCIe0 AXI clock
+			- "aggre1"	Aggre NoC PCIe1 AXI clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>

@@ -246,7 +265,7 @@
 			- "ahb"			AHB reset
 
 - reset-names:
-	Usage: required for sc8180x, sdm845 and sm8250
+	Usage: required for sc8180x, sdm845, sm8250 and sm8450
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "pci"			PCIe core reset

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 02/10] dt-bindings: phy: qcom,qmp: Add SM8450 PCIe PHY bindings

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:58:59

There are two different PCIe PHYs on SM8450, one having one lane and
another with two lanes. Add DT bindings for the first one. Support for
second PCIe host and PHY will be submitted separately.

Signed-off-by: Dmitry Baryshkov <redacted>
Reviewed-by: Bjorn Andersson <redacted>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index c59bbca9a900..d18075cb2b5d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml

@@ -50,6 +50,7 @@ properties:
       - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8350-qmp-usb3-phy
       - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,sm8450-qmp-gen3x1-pcie-phy
       - qcom,sm8450-qmp-ufs-phy
       - qcom,sdx55-qmp-pcie-phy
       - qcom,sdx55-qmp-usb3-uni-phy

@@ -333,6 +334,7 @@ allOf:
               - qcom,sm8250-qmp-gen3x1-pcie-phy
               - qcom,sm8250-qmp-gen3x2-pcie-phy
               - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
     then:
       properties:
         clocks:

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 03/10] phy: qcom-qmp: Add SM8450 PCIe0 PHY support

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:01

There are two different PCIe PHYs on SM8450, one having one lane (v5)
and another with two lanes (v5.20). This commit adds support for the
first PCIe phy only, support for the second PCIe PHY is coming in next
commits.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 125 ++++++++++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h |  33 ++++++++
 2 files changed, 158 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index a959c97a699f..19c17678b999 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c

@@ -2866,6 +2866,97 @@ static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
 };
 
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+};
+
 struct qmp_phy;
 
 /* struct qmp_phy_cfg - per-PHY initialization config */

@@ -4116,6 +4207,37 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
 	.is_dual_lane_phy	= true,
 };
 
+static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
+	.type = PHY_TYPE_PCIE,
+	.nlanes = 1,
+
+	.serdes_tbl		= sm8450_qmp_gen3x1_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
+	.tx_tbl			= sm8450_qmp_gen3x1_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
+	.rx_tbl			= sm8450_qmp_gen3x1_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
+	.pcs_tbl		= sm8450_qmp_gen3x1_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
+	.pcs_misc_tbl		= sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
+	.pcs_misc_tbl_num	= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
+	.clk_list		= sdm845_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_pciephy_clk_l),
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sm8250_pcie_regs_layout,
+
+	.start_ctrl             = SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= 995,		/* us */
+	.pwrdn_delay_max	= 1005,		/* us */
+};
+
 static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,

@@ -5774,6 +5896,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
 		.data = &sm8350_usb3_uniphy_cfg,
+	}, {
+		.compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
+		.data = &sm8450_qmp_gen3x1_pciephy_cfg,
 	}, {
 		.compatible = "qcom,sm8450-qmp-ufs-phy",
 		.data = &sm8450_ufsphy_cfg,

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e15f461065bb..08422037f81b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h

@@ -1069,6 +1069,15 @@
 #define QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2		0x828
 
 /* Only for QMP V5 PHY - QSERDES COM registers */
+#define QSERDES_V5_COM_SSC_EN_CENTER			0x010
+#define QSERDES_V5_COM_SSC_PER1				0x01c
+#define QSERDES_V5_COM_SSC_PER2				0x020
+#define QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0		0x024
+#define QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0		0x028
+#define QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1		0x030
+#define QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1		0x034
+#define QSERDES_V5_COM_CLK_ENABLE1			0x048
+#define QSERDES_V5_COM_SYSCLK_BUF_ENABLE		0x050
 #define QSERDES_V5_COM_PLL_IVCO				0x058
 #define QSERDES_V5_COM_CP_CTRL_MODE0			0x074
 #define QSERDES_V5_COM_CP_CTRL_MODE1			0x078

@@ -1084,10 +1093,22 @@
 #define QSERDES_V5_COM_DEC_START_MODE0			0x0bc
 #define QSERDES_V5_COM_LOCK_CMP2_MODE1			0x0b8
 #define QSERDES_V5_COM_DEC_START_MODE1			0x0c4
+#define QSERDES_V5_COM_DIV_FRAC_START1_MODE0		0x0cc
+#define QSERDES_V5_COM_DIV_FRAC_START2_MODE0		0x0d0
+#define QSERDES_V5_COM_DIV_FRAC_START3_MODE0		0x0d4
+#define QSERDES_V5_COM_DIV_FRAC_START1_MODE1		0x0d8
+#define QSERDES_V5_COM_DIV_FRAC_START2_MODE1		0x0dc
+#define QSERDES_V5_COM_DIV_FRAC_START3_MODE1		0x0e0
 #define QSERDES_V5_COM_VCO_TUNE_MAP			0x10c
+#define QSERDES_V5_COM_VCO_TUNE1_MODE0			0x110
+#define QSERDES_V5_COM_VCO_TUNE2_MODE0			0x114
+#define QSERDES_V5_COM_VCO_TUNE1_MODE1			0x118
+#define QSERDES_V5_COM_VCO_TUNE2_MODE1			0x11c
 #define QSERDES_V5_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V5_COM_CLK_SELECT			0x154
 #define QSERDES_V5_COM_HSCLK_SEL			0x158
 #define QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL		0x15c
+#define QSERDES_V5_COM_CORECLK_DIV_MODE1		0x16c
 #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x1ac
 #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x1b0
 #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1	0x1b4

@@ -1130,6 +1151,7 @@
 #define QSERDES_V5_RX_AC_JTAG_ENABLE			0x068
 #define QSERDES_V5_RX_AC_JTAG_MODE			0x078
 #define QSERDES_V5_RX_RX_TERM_BW			0x080
+#define QSERDES_V5_RX_TX_ADAPT_POST_THRESH		0x0cc
 #define QSERDES_V5_RX_VGA_CAL_CNTRL1			0x0d4
 #define QSERDES_V5_RX_VGA_CAL_CNTRL2			0x0d8
 #define QSERDES_V5_RX_GM_CAL				0x0dc

@@ -1167,6 +1189,17 @@
 #define QSERDES_V5_RX_DCC_CTRL1				0x1a8
 #define QSERDES_V5_RX_VTH_CODE				0x1b0
 
+/* Only for QMP V5 PHY - USB/PCIe PCS registers */
+#define QPHY_V5_PCS_REFGEN_REQ_CONFIG1			0x0dc
+#define QPHY_V5_PCS_RX_SIGDET_LVL			0x188
+#define QPHY_V5_PCS_RATE_SLEW_CNTRL1			0x198
+
+/* Only for QMP V5 PHY - PCS_PCIE registers */
+#define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE		0x20
+#define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1		0x54
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS		0x94
+#define QPHY_V5_PCS_PCIE_EQ_CONFIG2			0xa8
+
 /* Only for QMP V5 PHY - UFS PCS registers */
 #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
 #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 04/10] PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:03

In preparation to adding more flags to configuration data, use pointer
to struct qcom_pcie_cfg directly inside struct qcom_pcie, rather than
duplicating all its fields. This would save us from the boilerplate code
that just copies flag values from one struct to another one.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 39 +++++++++++---------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 1c3d1116bb60..51a0475173fb 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c

@@ -204,8 +204,7 @@ struct qcom_pcie {
 	union qcom_pcie_resources res;
 	struct phy *phy;
 	struct gpio_desc *reset;
-	const struct qcom_pcie_ops *ops;
-	unsigned int pipe_clk_need_muxing:1;
+	const struct qcom_pcie_cfg *cfg;
 };
 
 #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)

@@ -229,8 +228,8 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
 
 	/* Enable Link Training state machine */
-	if (pcie->ops->ltssm_enable)
-		pcie->ops->ltssm_enable(pcie);
+	if (pcie->cfg->ops->ltssm_enable)
+		pcie->cfg->ops->ltssm_enable(pcie);
 
 	return 0;
 }

@@ -1176,7 +1175,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;
 
-	if (pcie->pipe_clk_need_muxing) {
+	if (pcie->cfg->pipe_clk_need_muxing) {
 		res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
 		if (IS_ERR(res->pipe_clk_src))
 			return PTR_ERR(res->pipe_clk_src);

@@ -1209,7 +1208,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	}
 
 	/* Set TCXO as clock source for pcie_pipe_clk_src */
-	if (pcie->pipe_clk_need_muxing)
+	if (pcie->cfg->pipe_clk_need_muxing)
 		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
 
 	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);

@@ -1284,7 +1283,7 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
 	/* Set pipe clock as clock source for pcie_pipe_clk_src */
-	if (pcie->pipe_clk_need_muxing)
+	if (pcie->cfg->pipe_clk_need_muxing)
 		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
 
 	return clk_prepare_enable(res->pipe_clk);

@@ -1384,7 +1383,7 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 
 	qcom_ep_reset_assert(pcie);
 
-	ret = pcie->ops->init(pcie);
+	ret = pcie->cfg->ops->init(pcie);
 	if (ret)
 		return ret;

@@ -1392,16 +1391,16 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	if (ret)
 		goto err_deinit;
 
-	if (pcie->ops->post_init) {
-		ret = pcie->ops->post_init(pcie);
+	if (pcie->cfg->ops->post_init) {
+		ret = pcie->cfg->ops->post_init(pcie);
 		if (ret)
 			goto err_disable_phy;
 	}
 
 	qcom_ep_reset_deassert(pcie);
 
-	if (pcie->ops->config_sid) {
-		ret = pcie->ops->config_sid(pcie);
+	if (pcie->cfg->ops->config_sid) {
+		ret = pcie->cfg->ops->config_sid(pcie);
 		if (ret)
 			goto err;
 	}

@@ -1410,12 +1409,12 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 
 err:
 	qcom_ep_reset_assert(pcie);
-	if (pcie->ops->post_deinit)
-		pcie->ops->post_deinit(pcie);
+	if (pcie->cfg->ops->post_deinit)
+		pcie->cfg->ops->post_deinit(pcie);
 err_disable_phy:
 	phy_power_off(pcie->phy);
 err_deinit:
-	pcie->ops->deinit(pcie);
+	pcie->cfg->ops->deinit(pcie);
 
 	return ret;
 }

@@ -1531,7 +1530,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	struct pcie_port *pp;
 	struct dw_pcie *pci;
 	struct qcom_pcie *pcie;
-	const struct qcom_pcie_cfg *pcie_cfg;
 	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);

@@ -1553,15 +1551,12 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 
 	pcie->pci = pci;
 
-	pcie_cfg = of_device_get_match_data(dev);
-	if (!pcie_cfg || !pcie_cfg->ops) {
+	pcie->cfg = of_device_get_match_data(dev);
+	if (!pcie->cfg || !pcie->cfg->ops) {
 		dev_err(dev, "Invalid platform data\n");
 		return -EINVAL;
 	}
 
-	pcie->ops = pcie_cfg->ops;
-	pcie->pipe_clk_need_muxing = pcie_cfg->pipe_clk_need_muxing;
-
 	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
 	if (IS_ERR(pcie->reset)) {
 		ret = PTR_ERR(pcie->reset);

@@ -1586,7 +1581,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_pm_runtime_put;
 	}
 
-	ret = pcie->ops->get_resources(pcie);
+	ret = pcie->cfg->ops->get_resources(pcie);
 	if (ret)
 		goto err_pm_runtime_put;

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 05/10] PCI: qcom: Add ddrss_sf_tbu flag

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:05

Qualcomm PCIe driver uses compatible string to check if the ddrss_sf_tbu
clock should be used. Since sc7280 support has added flags, switch to
the new mechanism to check if this clock should be used.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 51a0475173fb..2f9a9497733e 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c

@@ -195,6 +195,7 @@ struct qcom_pcie_ops {
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
 	unsigned int pipe_clk_need_muxing:1;
+	unsigned int has_ddrss_sf_tbu_clk:1;
 };
 
 struct qcom_pcie {

@@ -1164,7 +1165,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	res->clks[3].id = "bus_slave";
 	res->clks[4].id = "slave_q2a";
 	res->clks[5].id = "tbu";
-	if (of_device_is_compatible(dev->of_node, "qcom,pcie-sm8250")) {
+	if (pcie->cfg->has_ddrss_sf_tbu_clk) {
 		res->clks[6].id = "ddrss_sf_tbu";
 		res->num_clks = 7;
 	} else {

@@ -1512,6 +1513,7 @@ static const struct qcom_pcie_cfg sdm845_cfg = {
 
 static const struct qcom_pcie_cfg sm8250_cfg = {
 	.ops = &ops_1_9_0,
+	.has_ddrss_sf_tbu_clk = true,
 };
 
 static const struct qcom_pcie_cfg sc7280_cfg = {

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 06/10] PCI: qcom: Add SM8450 PCIe support

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:06

On SM8450 platform PCIe hosts do not use all the clocks (and add several
additional clocks), so expand the driver to handle these requirements.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 47 +++++++++++++++++++-------
 1 file changed, 34 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 2f9a9497733e..d129729bb2a6 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c

@@ -161,7 +161,7 @@ struct qcom_pcie_resources_2_3_3 {
 
 /* 6 clocks typically, 7 for sm8250 */
 struct qcom_pcie_resources_2_7_0 {
-	struct clk_bulk_data clks[7];
+	struct clk_bulk_data clks[9];
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;

@@ -195,7 +195,10 @@ struct qcom_pcie_ops {
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
 	unsigned int pipe_clk_need_muxing:1;
+	unsigned int has_tbu_clk:1;
 	unsigned int has_ddrss_sf_tbu_clk:1;
+	unsigned int has_aggre0_clk:1;
+	unsigned int has_aggre1_clk:1;
 };
 
 struct qcom_pcie {

@@ -1146,6 +1149,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
+	unsigned int idx;
 	int ret;
 
 	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");

@@ -1159,18 +1163,22 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret)
 		return ret;
 
-	res->clks[0].id = "aux";
-	res->clks[1].id = "cfg";
-	res->clks[2].id = "bus_master";
-	res->clks[3].id = "bus_slave";
-	res->clks[4].id = "slave_q2a";
-	res->clks[5].id = "tbu";
-	if (pcie->cfg->has_ddrss_sf_tbu_clk) {
-		res->clks[6].id = "ddrss_sf_tbu";
-		res->num_clks = 7;
-	} else {
-		res->num_clks = 6;
-	}
+	idx = 0;
+	res->clks[idx++].id = "aux";
+	res->clks[idx++].id = "cfg";
+	res->clks[idx++].id = "bus_master";
+	res->clks[idx++].id = "bus_slave";
+	res->clks[idx++].id = "slave_q2a";
+	if (pcie->cfg->has_tbu_clk)
+		res->clks[idx++].id = "tbu";
+	if (pcie->cfg->has_ddrss_sf_tbu_clk)
+		res->clks[idx++].id = "ddrss_sf_tbu";
+	if (pcie->cfg->has_aggre0_clk)
+		res->clks[idx++].id = "aggre0";
+	if (pcie->cfg->has_aggre1_clk)
+		res->clks[idx++].id = "aggre1";
+
+	res->num_clks = idx;
 
 	ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
 	if (ret < 0)

@@ -1509,15 +1517,27 @@ static const struct qcom_pcie_cfg ipq4019_cfg = {
 
 static const struct qcom_pcie_cfg sdm845_cfg = {
 	.ops = &ops_2_7_0,
+	.has_tbu_clk = true,
 };
 
 static const struct qcom_pcie_cfg sm8250_cfg = {
 	.ops = &ops_1_9_0,
+	.has_tbu_clk = true,
 	.has_ddrss_sf_tbu_clk = true,
 };
 
+/* Only for the PCIe0! */
+static const struct qcom_pcie_cfg sm8450_cfg = {
+	.ops = &ops_1_9_0,
+	.has_ddrss_sf_tbu_clk = true,
+	.pipe_clk_need_muxing = true,
+	.has_aggre0_clk = true,
+	.has_aggre1_clk = true,
+};
+
 static const struct qcom_pcie_cfg sc7280_cfg = {
 	.ops = &ops_1_9_0,
+	.has_tbu_clk = true,
 	.pipe_clk_need_muxing = true,
 };

@@ -1625,6 +1645,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
 	{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
 	{ .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
+	{ .compatible = "qcom,pcie-sm8450", .data = &sm8450_cfg },
 	{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
 	{ }
 };

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 07/10] arm64: dts: qcom: sm8450: add PCIe0 PHY node

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:07

Add device tree node for the first PCIe PHY device found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 ++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 16a789cacb65..a047d8a22897 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -558,8 +558,12 @@ gcc: clock-controller@100000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clock-names = "bi_tcxo", "sleep_clk";
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&pcie0_lane>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "pcie_0_pipe_clk",
+				      "sleep_clk";
 		};
 
 		qupv3_id_0: geniqup@9c0000 {

@@ -625,6 +629,40 @@ i2c14: i2c@a98000 {
 			};
 		};
 
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x200>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: lanes@1c06200 {
+				reg = <0 0x1c06e00 0 0x200>, /* tx */
+				      <0 0x1c07000 0 0x200>, /* rx */
+				      <0 0x1c06200 0 0x200>, /* pcs */
+				      <0 0x1c06600 0 0x200>; /* pcs_pcie */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm8450-config-noc";
 			reg = <0 0x01500000 0 0x1c000>;

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 08/10] arm64: dts: qcom: sm8450: add PCIe0 RC device

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:10

Add device tree node for the first PCIe host found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <redacted>
Acked-by: Manivannan Sadhasivam <redacted>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 101 +++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index a047d8a22897..f4bebaded8f4 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -627,6 +627,84 @@ i2c14: i2c@a98000 {
 				#size-cells = <0>;
 				status = "disabled";
 			};
+		];
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8450";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+				 <&pcie0_lane>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			iommus = <&apps_smmu 0x1c00 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+			power-domain-names = "gdsc";
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_default_state>;
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>;
+			interconnect-names = "pci";
+
+			status = "disabled";
 		};
 
 		pcie0_phy: phy@1c06000 {

@@ -763,6 +841,29 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			pcie0_default_state: pcie0-default {
+				perst {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq {
+					pins = "gpio95";
+					function = "pcie0_clkreqn";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			qup_i2c13_default_state: qup-i2c13-default-state {
 				mux {
 					pins = "gpio48", "gpio49";

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 09/10] arm64: dts: qcom: sm8450-qrd: enable PCIe0 PHY device

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:11

Enable PCIe0 PHY on the SM8450 QRD device.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index cd74b97b9018..e02d3c86e365 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts

@@ -346,10 +346,20 @@ vreg_l6e_1p2: ldo6 {
 	};
 };
 
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <36 4>;
 };

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 10/10] arm64: dts: qcom: sm8450-qrd: enable PCIe0 host

From: Dmitry Baryshkov <hidden>
Date: 2021-12-14 22:59:13

Enable PCIe0 host on SM8450 QRD device.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index e02d3c86e365..f6577ca7d2df 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts

@@ -346,6 +346,10 @@ vreg_l6e_1p2: ldo6 {
 	};
 };
 
+&pcie0 {
+	status = "okay";
+};
+
 &pcie0_phy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l5b_0p88>;

-- 
2.33.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 01/10] dt-bindings: pci: qcom: Document PCIe bindings for SM8450

From: Rob Herring <robh@kernel.org>
Date: 2021-12-15 21:37:24

On Wed, Dec 15, 2021 at 01:58:37AM +0300, Dmitry Baryshkov wrote:

Document the PCIe DT bindings for SM8450 SoC.The PCIe IP is similar
to the one used on SM8250. Add the compatible for SM8450.

Signed-off-by: Dmitry Baryshkov <redacted>
Acked-by: Manivannan Sadhasivam <redacted>
---
 .../devicetree/bindings/pci/qcom,pcie.txt     | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

I hope someone decides to convert this to schema soon...

quoted hunk

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index a0ae024c2d0c..73bc763c5009 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt

@@ -15,6 +15,7 @@
 			- "qcom,pcie-sc8180x" for sc8180x
 			- "qcom,pcie-sdm845" for sdm845
 			- "qcom,pcie-sm8250" for sm8250
+			- "qcom,pcie-sm8450" for sm8450
 			- "qcom,pcie-ipq6018" for ipq6018
 
 - reg:

@@ -169,6 +170,24 @@
 			- "ddrss_sf_tbu" PCIe SF TBU clock
 			- "pipe"	PIPE clock
 
+- clock-names:
+	Usage: required for sm8450
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"         Auxiliary clock
+			- "cfg"         Configuration clock
+			- "bus_master"  Master AXI clock
+			- "bus_slave"   Slave AXI clock
+			- "slave_q2a"   Slave Q2A clock
+			- "tbu"         PCIe TBU clock
+			- "ddrss_sf_tbu" PCIe SF TBU clock
+			- "pipe"        PIPE clock
+			- "pipe_mux"    PIPE MUX
+			- "phy_pipe"    PIPE output clock
+			- "ref"         REFERENCE clock
+			- "aggre0"	Aggre NoC PCIe0 AXI clock
+			- "aggre1"	Aggre NoC PCIe1 AXI clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>

@@ -246,7 +265,7 @@
 			- "ahb"			AHB reset
 
 - reset-names:
-	Usage: required for sc8180x, sdm845 and sm8250
+	Usage: required for sc8180x, sdm845, sm8250 and sm8450
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "pci"			PCIe core reset

-- 
2.33.0

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 01/10] dt-bindings: pci: qcom: Document PCIe bindings for SM8450

From: Rob Herring <robh@kernel.org>
Date: 2021-12-15 21:37:36

On Wed, 15 Dec 2021 01:58:37 +0300, Dmitry Baryshkov wrote:

Document the PCIe DT bindings for SM8450 SoC.The PCIe IP is similar
to the one used on SM8250. Add the compatible for SM8450.

Signed-off-by: Dmitry Baryshkov <redacted>
Acked-by: Manivannan Sadhasivam <redacted>
---
 .../devicetree/bindings/pci/qcom,pcie.txt     | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

Reviewed-by: Rob Herring <robh@kernel.org>

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 02/10] dt-bindings: phy: qcom,qmp: Add SM8450 PCIe PHY bindings

From: Rob Herring <robh@kernel.org>
Date: 2021-12-15 21:37:44

On Wed, 15 Dec 2021 01:58:38 +0300, Dmitry Baryshkov wrote:

There are two different PCIe PHYs on SM8450, one having one lane and
another with two lanes. Add DT bindings for the first one. Support for
second PCIe host and PHY will be submitted separately.

Signed-off-by: Dmitry Baryshkov <redacted>
Reviewed-by: Bjorn Andersson <redacted>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++
 1 file changed, 2 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 02/10] dt-bindings: phy: qcom,qmp: Add SM8450 PCIe PHY bindings

From: Vinod Koul <vkoul@kernel.org>
Date: 2021-12-18 05:55:40

On 15-12-21, 01:58, Dmitry Baryshkov wrote:

There are two different PCIe PHYs on SM8450, one having one lane and
another with two lanes. Add DT bindings for the first one. Support for
second PCIe host and PHY will be submitted separately.

Applied to phy-next, thanks

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 03/10] phy: qcom-qmp: Add SM8450 PCIe0 PHY support

From: Vinod Koul <vkoul@kernel.org>
Date: 2021-12-18 05:56:22

On 15-12-21, 01:58, Dmitry Baryshkov wrote:

There are two different PCIe PHYs on SM8450, one having one lane (v5)
and another with two lanes (v5.20). This commit adds support for the
first PCIe phy only, support for the second PCIe PHY is coming in next
commits.

Applied to phy-next, thanks

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help