Add device tree node for the first PCIe host found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <redacted>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 101 +++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index a047d8a22897..09087a34a007 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -627,6 +627,84 @@ i2c14: i2c@a98000 {
                                #size-cells = <0>;
                                status = "disabled";
                        };
+               ];
+
+               pcie0: pci@1c00000 {
+                       compatible = "qcom,pcie-sm8450";
+                       reg = <0 0x01c00000 0 0x3000>,
+                             <0 0x60000000 0 0xf1d>,
+                             <0 0x60000f20 0 0xa8>,
+                             <0 0x60001000 0 0x1000>,
+                             <0 0x60100000 0 0x100000>;
+                       reg-names = "parf", "dbi", "elbi", "atu", "config";
+                       device_type = "pci";
+                       linux,pci-domain = <0>;
+                       bus-range = <0x00 0xff>;
+                       num-lanes = <1>;
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+
+                       ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
+                                <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+
+                       interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "msi";
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 0x7>;
+                       interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                                       <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                                       <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                                       <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+                       clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                                <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+                                <&pcie0_lane>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_PCIE_0_AUX_CLK>,
+                                <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                                <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                                <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                                <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                                <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                                <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                                <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+                       clock-names = "pipe",
+                                     "pipe_mux",
+                                     "phy_pipe",
+                                     "ref",
+                                     "aux",
+                                     "cfg",
+                                     "bus_master",
+                                     "bus_slave",
+                                     "slave_q2a",
+                                     "ddrss_sf_tbu",
+                                     "aggre0",
+                                     "aggre1";
+
+                       iommus = <&apps_smmu 0x1c00 0x7f>;
+                       iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+                                   <0x100 &apps_smmu 0x1c01 0x1>;
+
+                       resets = <&gcc GCC_PCIE_0_BCR>;
+                       reset-names = "pci";
+
+                       power-domains = <&gcc PCIE_0_GDSC>;
+                       power-domain-names = "gdsc";
+
+                       phys = <&pcie0_lane>;
+                       phy-names = "pciephy";
+
+                       perst-gpio = <&tlmm 94 GPIO_ACTIVE_LOW>;
+                       enable-gpio = <&tlmm 96 GPIO_ACTIVE_HIGH>;