[PATCH v3 2/2] phy: phy-can-transceiver: Add support for setting mux
From: Aswath Govindraju <hidden>
Date: 2021-12-16 04:10:41
Also in:
linux-can, linux-devicetree, lkml
Subsystem:
can network drivers, generic phy framework, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Vinod Koul, Linus Torvalds
On some boards, for routing CAN signals from controller to transceiver, muxes might need to be set. Therefore, add support for setting the mux by reading the mux-states property from the device tree node. Signed-off-by: Aswath Govindraju <redacted> --- drivers/phy/Kconfig | 1 + drivers/phy/phy-can-transceiver.c | 24 +++++++++++++++++++++++- 2 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 82b63e60c5a2..300b0f2b5f84 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig@@ -64,6 +64,7 @@ config USB_LGM_PHY config PHY_CAN_TRANSCEIVER tristate "CAN transceiver PHY" select GENERIC_PHY + select MULTIPLEXER help This option enables support for CAN transceivers as a PHY. This driver provides function for putting the transceivers in various
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 6f3fe37dee0e..95c6dbb52da7 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c@@ -10,6 +10,7 @@ #include<linux/module.h> #include<linux/gpio.h> #include<linux/gpio/consumer.h> +#include <linux/mux/consumer.h> struct can_transceiver_data { u32 flags;
@@ -21,13 +22,22 @@ struct can_transceiver_phy { struct phy *generic_phy; struct gpio_desc *standby_gpio; struct gpio_desc *enable_gpio; + struct mux_state *mux_state; }; /* Power on function */ static int can_transceiver_phy_power_on(struct phy *phy) { struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); - + int ret; + + if (can_transceiver_phy->mux_state) { + ret = mux_state_select(can_transceiver_phy->mux_state); + if (ret) { + dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret); + return ret; + } + } if (can_transceiver_phy->standby_gpio) gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0); if (can_transceiver_phy->enable_gpio)
@@ -45,6 +55,8 @@ static int can_transceiver_phy_power_off(struct phy *phy) gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1); if (can_transceiver_phy->enable_gpio) gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0); + if (can_transceiver_phy->mux_state) + mux_state_deselect(can_transceiver_phy->mux_state); return 0; }
@@ -95,6 +107,16 @@ static int can_transceiver_phy_probe(struct platform_device *pdev) match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node); drvdata = match->data; + if (of_property_read_bool(dev->of_node, "mux-states")) { + struct mux_state *mux_state; + + mux_state = devm_mux_state_get(dev, NULL); + if (IS_ERR(mux_state)) + return dev_err_probe(&pdev->dev, PTR_ERR(mux_state), + "failed to get mux\n"); + can_transceiver_phy->mux_state = mux_state; + } + phy = devm_phy_create(dev, dev->of_node, &can_transceiver_phy_ops); if (IS_ERR(phy)) {
--
2.17.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy