On 05-08-21, 12:17, Iskren Chernev wrote:

+/* Only for QMP V3 660 PHY - QSERDES COM registers*/
+#define QSERDES_V3_660_COM_ATB_SEL1			0x000
+#define QSERDES_V3_660_COM_ATB_SEL2			0x004
+#define QSERDES_V3_660_COM_FREQ_UPDATE			0x008
+#define QSERDES_V3_660_COM_BG_TIMER			0x00c
+#define QSERDES_V3_660_COM_SSC_EN_CENTER		0x010
+#define QSERDES_V3_660_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_V3_660_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_V3_660_COM_SSC_PER1			0x01c
+#define QSERDES_V3_660_COM_SSC_PER2			0x020
+#define QSERDES_V3_660_COM_SSC_STEP_SIZE1		0x024
+#define QSERDES_V3_660_COM_SSC_STEP_SIZE2		0x028
+#define QSERDES_V3_660_COM_POST_DIV			0x02c
+#define QSERDES_V3_660_COM_POST_DIV_MUX			0x030
+#define QSERDES_V3_660_COM_BIAS_EN_CLKBUFLR_EN		0x034
+#define QSERDES_V3_660_COM_CLK_ENABLE1			0x038
+#define QSERDES_V3_660_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_V3_660_COM_SYSCLK_BUF_ENABLE		0x040
+#define QSERDES_V3_660_COM_PLL_EN			0x044
+#define QSERDES_V3_660_COM_PLL_IVCO			0x048
+#define QSERDES_V3_660_COM_LOCK_CMP1_MODE0		0x04c
+#define QSERDES_V3_660_COM_LOCK_CMP2_MODE0		0x050
+#define QSERDES_V3_660_COM_LOCK_CMP3_MODE0		0x054
+#define QSERDES_V3_660_COM_LOCK_CMP1_MODE1		0x058
+#define QSERDES_V3_660_COM_LOCK_CMP2_MODE1		0x05c
+#define QSERDES_V3_660_COM_LOCK_CMP3_MODE1		0x060
+#define QSERDES_V3_660_COM_CMD_RSVD0			0x064
+#define QSERDES_V3_660_COM_EP_CLOCK_DETECT_CTRL		0x068
+#define QSERDES_V3_660_COM_SYSCLK_DET_COMP_STATUS	0x06c
+#define QSERDES_V3_660_COM_BG_TRIM			0x070
+#define QSERDES_V3_660_COM_CLK_EP_DIV			0x074
+#define QSERDES_V3_660_COM_CP_CTRL_MODE0		0x078
+#define QSERDES_V3_660_COM_CP_CTRL_MODE1		0x07c
+#define QSERDES_V3_660_COM_CMN_RSVD1			0x080
+#define QSERDES_V3_660_COM_PLL_RCTRL_MODE0		0x084
+#define QSERDES_V3_660_COM_PLL_RCTRL_MODE1		0x088
+#define QSERDES_V3_660_COM_CMN_RSVD2			0x08c
+#define QSERDES_V3_660_COM_PLL_CCTRL_MODE0		0x090
+#define QSERDES_V3_660_COM_PLL_CCTRL_MODE1		0x094
+#define QSERDES_V3_660_COM_CMN_RSVD3			0x098
+#define QSERDES_V3_660_COM_PLL_CNTRL			0x09c
+#define QSERDES_V3_660_COM_PHASE_SEL_CTRL		0x0a0
+#define QSERDES_V3_660_COM_PHASE_SEL_DC			0x0a4
+#define QSERDES_V3_660_COM_BIAS_EN_CTRL_BY_PSM		0x0a8
+#define QSERDES_V3_660_COM_SYSCLK_EN_SEL		0x0ac
+#define QSERDES_V3_660_COM_CML_SYSCLK_SEL		0x0b0
+#define QSERDES_V3_660_COM_RESETSM_CNTRL		0x0b4
+#define QSERDES_V3_660_COM_RESETSM_CNTRL2		0x0b8
+#define QSERDES_V3_660_COM_RESTRIM_CTRL			0x0bc
+#define QSERDES_V3_660_COM_RESTRIM_CTRL2		0x0c0
+#define QSERDES_V3_660_COM_LOCK_CMP_EN			0x0c8
+#define QSERDES_V3_660_COM_LOCK_CMP_CFG			0x0cc
+#define QSERDES_V3_660_COM_DEC_START_MODE0		0x0d0
+#define QSERDES_V3_660_COM_DEC_START_MODE1		0x0d4
+#define QSERDES_V3_660_COM_VCOCAL_DEADMAN_CTRL		0x0d8
+#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0	0x0dc
+#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0	0x0e0
+#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0	0x0e4
+#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1	0x0e8
+#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1	0x0ec
+#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1	0x0f0
+#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL1		0x0f4
+#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL2		0x0f8
+#define QSERDES_V3_660_COM_CMN_RSVD4			0x0fc
+#define QSERDES_V3_660_COM_INTEGLOOP_INITVAL		0x100
+#define QSERDES_V3_660_COM_INTEGLOOP_EN			0x104
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0	0x108
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0	0x10c
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1	0x110
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1	0x114
+#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL1		0x118
+#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL2		0x11c
+#define QSERDES_V3_660_COM_RES_TRIM_CONTROL2		0x120
+#define QSERDES_V3_660_COM_VCO_TUNE_CTRL		0x124
+#define QSERDES_V3_660_COM_VCO_TUNE_MAP			0x128
+#define QSERDES_V3_660_COM_VCO_TUNE1_MODE0		0x12c
+#define QSERDES_V3_660_COM_VCO_TUNE2_MODE0		0x130
+#define QSERDES_V3_660_COM_VCO_TUNE1_MODE1		0x134
+#define QSERDES_V3_660_COM_VCO_TUNE2_MODE1		0x138
+#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL1		0x13c
+#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL2		0x140
+#define QSERDES_V3_660_COM_VCO_TUNE_TIMER1		0x144
+#define QSERDES_V3_660_COM_VCO_TUNE_TIMER2		0x148
+#define QSERDES_V3_660_COM_SAR				0x14c
+#define QSERDES_V3_660_COM_SAR_CLK			0x150
+#define QSERDES_V3_660_COM_SAR_CODE_OUT_STATUS		0x154
+#define QSERDES_V3_660_COM_SAR_CODE_READY_STATUS	0x158
+#define QSERDES_V3_660_COM_CMN_STATUS			0x15c
+#define QSERDES_V3_660_COM_RESET_SM_STATUS		0x160
+#define QSERDES_V3_660_COM_RESTRIM_CODE_STATUS		0x164
+#define QSERDES_V3_660_COM_PLLCAL_CODE1_STATUS		0x168
+#define QSERDES_V3_660_COM_PLLCAL_CODE2_STATUS		0x16c
+#define QSERDES_V3_660_COM_BG_CTRL			0x170
+#define QSERDES_V3_660_COM_CLK_SELECT			0x174
+#define QSERDES_V3_660_COM_HSCLK_SEL			0x178
+#define QSERDES_V3_660_COM_INTEGLOOP_BINCODE_STATUS	0x17c
+#define QSERDES_V3_660_COM_PLL_ANALOG			0x180
+#define QSERDES_V3_660_COM_CORECLK_DIV			0x184
+#define QSERDES_V3_660_COM_SW_RESET			0x188
+#define QSERDES_V3_660_COM_CORE_CLK_EN			0x18c
+#define QSERDES_V3_660_COM_C_READY_STATUS		0x190
+#define QSERDES_V3_660_COM_CMN_CONFIG			0x194
+#define QSERDES_V3_660_COM_CMN_RATE_OVERRIDE		0x198
+#define QSERDES_V3_660_COM_SVS_MODE_CLK_SEL		0x19c
+#define QSERDES_V3_660_COM_DEBUG_BUS0			0x1a0
+#define QSERDES_V3_660_COM_DEBUG_BUS1			0x1a4
+#define QSERDES_V3_660_COM_DEBUG_BUS2			0x1a8
+#define QSERDES_V3_660_COM_DEBUG_BUS3			0x1ac
+#define QSERDES_V3_660_COM_DEBUG_BUS_SEL		0x1b0
+#define QSERDES_V3_660_COM_CMN_MISC1			0x1b4
+#define QSERDES_V3_660_COM_CORECLK_DIV_MODE1		0x1bc
+#define QSERDES_V3_660_COM_CMN_RSVD5			0x1c0

why are these registers 660 specific and not V3 like we have for
other generations..? Quick looks with V3 regs tells me that seem
similar....

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy