[PATCH 06/16] media: cadence: csi2rx: Soft reset the streams before starting capture
From: Pratyush Yadav <hidden>
Date: 2021-03-30 17:35:46
Also in:
dmaengine, linux-devicetree, linux-media, lkml
Subsystem:
cadence mipi-csi2 bridges, media input infrastructure (v4l/dvb), the rest · Maintainers:
Maxime Ripard, Mauro Carvalho Chehab, Linus Torvalds
This resets the stream state machines and FIFOs, giving them a clean slate. On J721E if the streams are not reset before starting the capture, the captured frame gets wrapped around vertically on every run after the first. Signed-off-by: Pratyush Yadav <redacted> --- drivers/media/platform/cadence/cdns-csi2rx.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 31bd80e3f780..b03d2d2e6762 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c@@ -39,6 +39,7 @@ #define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100) #define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000) +#define CSI2RX_STREAM_CTRL_SOFT_RST BIT(4) #define CSI2RX_STREAM_CTRL_START BIT(0) #define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008)
@@ -150,12 +151,22 @@ struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev) static void csi2rx_reset(struct csi2rx_priv *csi2rx) { + int i; + writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT, csi2rx->base + CSI2RX_SOFT_RESET_REG); udelay(10); writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG); + + /* Reset individual streams. */ + for (i = 0; i < csi2rx->max_streams; i++) { + writel(CSI2RX_STREAM_CTRL_SOFT_RST, + csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + usleep_range(10, 20); + writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + } } static int csi2rx_configure_external_dphy(struct csi2rx_priv *csi2rx)
--
2.30.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy