Re: [PATCH v3 0/6] AM64: Add SERDES driver support

Hi,

On 10/03/21 5:38 pm, Kishon Vijay Abraham I wrote:

AM64 uses the same SERDES as in J7200, however AM642 EVM doesn't
have a clock generator (unlike J7200 base board). Here the clock from
the SERDES has to be routed to the PCIE connector. This series adds
support to drive reference clock output from SERDES and also adds
SERDES (torrent) and SERDES wrapper (WIZ) bindings.

v1 of the patch series can be found @ [1]
v2 of the patch series can be found @ [3]

Failed to note the dependency here. This series depends on
http://lore.kernel.org/r/20210310112745.3445-1-kishon@ti.com (local)

As mentioned in the cover letter of that patch series, that series
should be merged and an immutable tag should be provided and used both
in phy tree and DT tree maintained by Nishanth.

Thanks
Kishon

Changes from v2:
*) Sent the DT bindings as a separate series [4]
*) Remove enabling PHY output clock in isolation mode

Changes from v1:
*) Model the internal clocks without device tree input (Add #clock-cells
   to SERDES DT nodes for getting a reference to the clock using index
   to phandle). This is in accordance with comment given by Rob [2].
   However the existing method to model clocks from device tree is not
   removed to support upstreamed device tree.
*) Included a patch to fix modifying static data by instance specific
   initializations.
*) Added a fix to delete "clk_div_sel" clk provider during cleanup

[1] -> https://lore.kernel.org/r/20201224114250.1083-1-kishon@ti.com (local)
[2] -> http://lore.kernel.org/r/20210108025943.GA1790601@robh.at.kernel.org (local)
[3] -> http://lore.kernel.org/r/20210222112314.10772-1-kishon@ti.com (local)
[4] -> http://lore.kernel.org/r/20210310112745.3445-1-kishon@ti.com (local)

Kishon Vijay Abraham I (6):
  phy: ti: j721e-wiz: Remove "regmap_field" from wiz_clk_{mux|div}_sel
  phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup
  phy: ti: j721e-wiz: Configure full rate divider for AM64
  phy: ti: j721e-wiz: Model the internal clocks without device tree
    input
  phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>
  phy: cadence-torrent: Add support to drive refclk out

 drivers/phy/cadence/Kconfig               |   1 +
 drivers/phy/cadence/phy-cadence-torrent.c | 188 +++++++++++-
 drivers/phy/ti/phy-j721e-wiz.c            | 349 +++++++++++++++++++---
 3 files changed, 488 insertions(+), 50 deletions(-)

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy