[RESEND PATCH V3 6/6] PCI: Enable 10-Bit tag support for PCIe RP devices
From: Dongdong Liu <hidden>
Date: 2021-06-13 09:30:25
Also in:
linux-media, netdev
Subsystem:
pci subsystem, the rest · Maintainers:
Bjorn Helgaas, Linus Torvalds
PCIe spec 5.0r1.0 section 2.2.6.2 implementation note, In configurations where a Requester with 10-Bit Tag Requester capability needs to target multiple Completers, one needs to ensure that the Requester sends 10-Bit Tag Requests only to Completers that have 10-Bit Tag Completer capability. So we enable 10-Bit Tag Requester for root port only when the devices under the root port support 10-Bit Tag Completer. Signed-off-by: Dongdong Liu <redacted> --- drivers/pci/pcie/portdrv_pci.c | 75 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index c7ff1ee..baf413f 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c@@ -90,6 +90,78 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { #define PCIE_PORTDRV_PM_OPS NULL #endif /* !PM */ +static int pci_10bit_tag_comp_support(struct pci_dev *dev, void *data) +{ + u8 *support = data; + + if (*support == 0) + return 0; + + if (!pci_is_pcie(dev)) { + *support = 0; + return 0; + } + + /* + * PCIe spec 5.0r1.0 section 2.2.6.2 implementation note. + * For configurations where a Requester with 10-Bit Tag Requester + * capability targets Completers where some do and some do not have + * 10-Bit Tag Completer capability, how the Requester determines which + * NPRs include 10-Bit Tags is outside the scope of this specification. + * So we do not consider hotplug scenario. + */ + if (dev->is_hotplug_bridge) { + *support = 0; + return 0; + } + + if (!(dev->pcie_devcap2 & PCI_EXP_DEVCAP2_10BIT_TAG_COMP)) { + *support = 0; + return 0; + } + + return 0; +} + +static void pci_configure_rp_10bit_tag(struct pci_dev *dev) +{ + u8 support = 1; + struct pci_dev *pchild; + + if (dev->subordinate == NULL) + return; + + /* If no devices under the root port, no need to enable 10-Bit Tag. */ + pchild = list_first_entry_or_null(&dev->subordinate->devices, + struct pci_dev, bus_list); + if (pchild == NULL) + return; + + pci_10bit_tag_comp_support(dev, &support); + if (!support) + return; + + /* + * PCIe spec 5.0r1.0 section 2.2.6.2 implementation note. + * In configurations where a Requester with 10-Bit Tag Requester + * capability needs to target multiple Completers, one needs to ensure + * that the Requester sends 10-Bit Tag Requests only to Completers + * that have 10-Bit Tag Completer capability. So we enable 10-Bit Tag + * Requester for root port only when the devices under the root port + * support 10-Bit Tag Completer. + */ + pci_walk_bus(dev->subordinate, pci_10bit_tag_comp_support, &support); + if (!support) + return; + + if (!(dev->pcie_devcap2 & PCI_EXP_DEVCAP2_10BIT_TAG_REQ)) + return; + + pci_dbg(dev, "enabling 10-Bit Tag Requester\n"); + pcie_capability_set_word(dev, PCI_EXP_DEVCTL2, + PCI_EXP_DEVCTL2_10BIT_TAG_REQ_EN); +} + /* * pcie_portdrv_probe - Probe PCI-Express port devices * @dev: PCI-Express port device being probed
@@ -111,6 +183,9 @@ static int pcie_portdrv_probe(struct pci_dev *dev, (type != PCI_EXP_TYPE_RC_EC))) return -ENODEV; + if (type == PCI_EXP_TYPE_ROOT_PORT) + pci_configure_rp_10bit_tag(dev); + if (type == PCI_EXP_TYPE_RC_EC) pcie_link_rcec(dev);
--
2.7.4