[PATCH 7.0 0760/1146] arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2026-05-20 16:58:54
Also in:
stable
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peng Fan <peng.fan@nxp.com>
[ Upstream commit 8ff145577e93f312ff398cb950ee3bd44835f5be ]
PMIC_nINT is low level triggered, but the current PAD settings is
PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured
as PULL UP with PULL Enable, no need SION. Correct it.
Fixes: 562d222f23f0f ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 7e46537a22a01..cb28cf1cdd23f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts@@ -1001,7 +1001,7 @@ MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00 0x0 pinctrl_pmic: pmic-grp { fsl,pins = < /* PMIC_nINT */ - MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c0 >; };
--
2.53.0