Geert Uytterhoeven [off-list ref] writes:

On Tue, Oct 19, 2021 at 3:33 PM Kalle Valo [off-list ref] wrote:

quoted

Geert Uytterhoeven [off-list ref] writes:

quoted

This patch series converts the Device Tree bindings for the Texas
Instruments Wilink Wireless LAN and Bluetooth Controllers to
json-schema, after fixing an issue in a Device Tree source file.

Thanks for your comments!

Geert Uytterhoeven (3):
  ARM: dts: motorola-mapphone: Drop second ti,wlcore compatible value
  dt-bindings: net: wireless: ti,wlcore: Convert to json-schema
  dt-bindings: net: ti,bluetooth: Convert to json-schema

 .../devicetree/bindings/net/ti,bluetooth.yaml |  91 ++++++++++++
 .../devicetree/bindings/net/ti-bluetooth.txt  |  60 --------
 .../bindings/net/wireless/ti,wlcore,spi.txt   |  57 --------
 .../bindings/net/wireless/ti,wlcore.txt       |  45 ------
 .../bindings/net/wireless/ti,wlcore.yaml      | 134 ++++++++++++++++++
 .../boot/dts/motorola-mapphone-common.dtsi    |   2 +-
 arch/arm/boot/dts/omap3-gta04a5.dts           |   2 +-
 7 files changed, 227 insertions(+), 164 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/ti,bluetooth.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/ti-bluetooth.txt
 delete mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
 delete mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml

Via which tree should these go?

The DTS change should go through the OMAP tree.
The binding changes through the net or DT trees.

I kept everything together for an improved overview.

Good, thanks. I'll then drop these from my queue.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches