Thread (16 messages) 16 messages, 3 authors, 2021-09-23

Re: [PATCH v2 1/3] dt-bindings: PCI: ti,j721e: Add bindings to specify legacy interrupts

From: Kishon Vijay Abraham I <hidden>
Date: 2021-08-09 04:39:08
Also in: linux-arm-kernel, linux-devicetree, linux-pci, lkml

Hi Marc,

On 04/08/21 8:35 pm, Marc Zyngier wrote:
On Wed, 04 Aug 2021 14:29:10 +0100,
Kishon Vijay Abraham I [off-list ref] wrote:
quoted
Add bindings to specify interrupt controller for legacy interrupts.

Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 .../bindings/pci/ti,j721e-pci-host.yaml           | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index cc900202df29..f461d7b4c0cc 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -74,6 +74,11 @@ properties:
 
   msi-map: true
 
+patternProperties:
+  "interrupt-controller":
+    type: object
+    description: interrupt controller to handle legacy interrupts.
+
 required:
   - compatible
   - reg
@@ -97,6 +102,8 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
     #include <dt-bindings/gpio/gpio.h>
 
@@ -131,5 +138,13 @@ examples:
             ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
                      <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
             dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+
+
+            pcie0_intc: interrupt-controller {
+                    interrupt-controller;
+                    #interrupt-cells = <1>;
+                    interrupt-parent = <&gic500>;
+                    interrupts = <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>;
Are you sure about the edge signalling? How is the interrupt
retriggered when the input is still high, which could well be the case
for shared INTx?
There is a EOI register which is used for re-triggering the interrupt.
That functionality is broken in J721E but is fixed in J7200 (the
following two patches in the series deals with that).

Thanks,
Kishon
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help