[PATCH 12/27] ARM: dts: Configure simple-pm-bus for dra7 l4_per2
From: Tony Lindgren <tony@atomide.com>
Date: 2021-01-26 17:09:18
Also in:
linux-devicetree, linux-pci
Subsystem:
the rest · Maintainer:
Linus Torvalds
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7-l4.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi@@ -2302,7 +2302,10 @@ segment@200000 { /* 0x48200000 */ }; &l4_per2 { /* 0x48400000 */ - compatible = "ti,dra7-l4-per2", "simple-bus"; + compatible = "ti,dra7-l4-per2", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48400000 0x800>, <0x48400800 0x800>, <0x48401000 0x400>,
@@ -2322,7 +2325,7 @@ &l4_per2 { /* 0x48400000 */ <0x48454000 0x48454000 0x400000>; /* L3 data port */ segment@0 { /* 0x48400000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
--
2.30.0