November 2014

1,275 messages across 234 threads. The 100 most recently active threads.

LastThreadReplies
Sunday 30 November
[PATCH v3 0/3] omapdss: Add video output support for gta04
Marek Belisko SUPERSEDED
3
Saturday 29 November
Re: [RFC] i2c: omap: TEST: do IP reset during probe.
Kevin Hilman
4
[RFC 0/2] i2c: omap: new fixes for driver
Alexander Kochetkov
2
[PATCH] tty: serial: serial-omap: depend on !8250_omap
Sebastian Andrzej Siewior
2
Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
Yegor Yefremov
1
[PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
Jyri Sarha
46
Friday 28 November
[PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode
Tony Lindgren
24
[GIT PULL] move omap gpmc to drivers finally
Tony Lindgren
3
[GIT PULL 1/2] part 2 of omap soc changes for v3.19
Arnd Bergmann
1
[PATCHv2] rpmsg: compute number of buffers to allocate from vrings
Suman Anna
4
[PATCH v6 0/7] Per-user clock constraints
Tomeu Vizoso SUPERSEDED
2
[GIT PULL 2/2] part 2 of omap dts changes for v3.19
Tony Lindgren
1
[PATCH 5/8] usb: musb: Change end point selection to use new IO access
Tony Lindgren
4
[PATCH 6/8] usb: musb: Pass fifo_mode in platform data
Tony Lindgren
2
[PATCH 0/3] ARM: edma: Correct header file usage
Peter Ujfalusi
13
[PATCH v9 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
Marek Szyprowski SUPERSEDED
10
[PATCH v4 0/8] net: can: Use syscon regmap for TI specific RAMINIT register
Roger Quadros
41
[PATCH 00/23] ARM: OMAP2+: PRCM cleanups towards 3.19 / part2
Tero Kristo
26
[PATCH] ARM: OMAP2+: AM43x: Add ID for ES1.2
Lokesh Vutla
none
Thursday 27 November
dts: n900: isp1704 gpio
Pali Rohár
1
[RFC PATCH 0/2] Add ioremap_exec enhancements
Dave Gerlach
4
[PATCH] arm: omap2: rx51-peripherals: fix build warning
Felipe Balbi
2
[PATCH v4] mailbox/omap: adapt to the new mailbox framework
Suman Anna
3
[RFC PATCH] ARM: DRA: hwmod: RTC: Add reset function for RTC
Lokesh Vutla
5
[PATCH v4 0/6] Touchscreen performance related fixes
Vignesh R SUPERSEDED
31
[PATCH 00/19] Add Support for USB DRD in AM437x
George Cherian
21
Wednesday 26 November
n900: kernel cmdline from bootloader in DT mode
Pali Rohár
5
[RFC 0/4] i2c: omap: patch series related to multimaster mode
Alexander Kochetkov SUPERSEDED
41
[RFC PATCH v5 0/4] ARM: OMAP2+: AM33XX: Add suspend-resume support
Dave Gerlach
4
[RFC PATCH 0/3] remoteproc: Introduce wkup_m3_rproc driver
Dave Gerlach SUPERSEDED
10
Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
Kevin Hilman
none
[RFC PATCH] misc: SRAM: Add option to map SRAM to allow code execution
Dave Gerlach
none
[PATCHv2 0/3] Move omap GPMC to live in drivers/memory
Tony Lindgren PENDING · 1 of 3 reviewed
10
Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
Kevin Hilman
1
3.13-rc3 (commit 7ce93f3) breaks Nokia N900 DT boot
Sebastian Reichel
3
Fix Penguin Penalty 17th October2014 ( mail-archive.com )
unknown sender
none
[PATCH] rtc: omap: drop vendor-prefix from power-controller dt property
Johan Hovold
none
[PATCH] mtd: nand: omap: Fix NAND enumeration on 3430 LDP
Roger Quadros
13
Tuesday 25 November
N900 modem support in 3.18-rc1
Pavel Machek
29
Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
Kevin Hilman REVIEWED · 1 review, 0 by maintainers
none
[PATCH] tty: serial: 8250: omap: Add pinctrl support for suspend
Sebastian Andrzej Siewior
6
[PATCH 00/11] Exynos7: Adding USB 3.0 support
Vivek Gautam
18
Re: [PATCH 4/8] usb: musb: Change to use new IO access
Linus Walleij REVIEWED · 1 review, 0 by maintainers
none
OMAP baseline test results for v3.18-rc6
Paul Walmsley
none
Monday 24 November
[PATCH 4/8] usb: musb: Change to use new IO access
Tony Lindgren
2
[PATCH 0/8] Allow multiple MUSB glue layers to be built in
Tony Lindgren
3
v3.18-rc1: n900 battery discharged down to 2.97V
Pavel Machek
2
[PATCH 7/8] usb: musb: Allow multiple glue layers to be built in
Tony Lindgren
none
[PATCH 1/8] usb: musb: Add function pointers for IO access functions
Tony Lindgren
none
[PATCH] ASoC: tlv320aic31xx: Fix off by one error in the loop stucture.
Jyri Sarha
1
[PATCH v4 00/10] ARM: dts: TI: Add CAN support
Roger Quadros
27
TLV320AIC3104 Sample rate problem
Catalin Crenguta
none
[PATCH 0/4] ARM: dts: sbc-t3x: add audio and TV out support
Dmitry Lifshitz
5
[PATCH v2 0/5] omapdss: Add video output support for gta04 board
Marek Belisko
10
[PATCH] ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver
Roger Quadros
none
Sunday 23 November
[PATCH 1/1] video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter"
SF Markus Elfring
none
[PATCH 4/9] sound/soc/omap/am3517evm.c: fix error return code
Julia Lawall
none
[GIT PULL 2/2] part 2 of omap dts changes for v3.19
Tony Lindgren
none
[GIT PULL 1/2] part 2 of omap soc changes for v3.19
Tony Lindgren
none
[GIT PULL 2/2] part 2 of omap dts changes for v3.19
Tony Lindgren
none
[GIT PULL 1/2] part 2 of omap soc changes for v3.19
Tony Lindgren
none
Saturday 22 November
[PATCH] i2c: omap: fix i207 errata handling
Alexander Kochetkov
6
[RFC] adp1653: Add device tree bindings for LED controller
Pavel Machek
34
[PATCH] usb: dwc3: return error code from the most recent call
Julia Lawall
none
[PATCH 1/1] ARM: OMAP2: Deletion of unnecessary checks before three function calls
SF Markus Elfring
none
[PATCH 01/10] arm: omap: omap2plus_defconfig: remove unwanted ethernet drivers
Felipe Balbi
21
[PATCH v3 0/2] Add support for ADC on am437x-gp and am43x-epos-evm
Vignesh R
4
[PATCH 0/9] ARM: dts: sbc-t3x: add more features support
Dmitry Lifshitz
10
[PATCH] ARM: dts: DRA7: Add node for RTC
Lokesh Vutla
7
Friday 21 November
[PATCH] DTS: ARM: OMAP3-N900: Add n900-battery support
Sebastian Reichel
1
[PATCH] ARM: DTS: OMAP3-N900: add si4713 support
Sebastian Reichel
1
[PATCH] ARM: Gumstix DuoVero: Bind vdac regulator to hdmi node
Adam YH Lee
1
[PATCH v13 5/9] arm: omap1: Migrate debug_ll macros to use 8250.S
Daniel Thompson SUPERSEDED · 1 review, 1 by a maintainer
1
[PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
Tony Lindgren
16
[PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
George McCollister
2
[GIT PULL v2] ARM: OMAP2+: some more hwmod & clock patches for v3.19
Paul Walmsley
1
[PATCH 0/3] Move omap GPMC to live in drivers/bus
Tony Lindgren
13
[PATCH 0/3] mmc: omap_hsmmc: make more use of mmc library functionality
NeilBrown SUPERSEDED
6
[PATCH v2 0/3] Add support for ADC on am437x-gp and am43x-epos-evm
Vignesh R SUPERSEDED
10
[PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
Alexander Kochetkov
7
Thursday 20 November
[PATCH] MAINTAINERS: add maintainer for OMAP hwmod data
Paul Walmsley
none
[PATCH 0/7] fix error return code
Julia Lawall
1
[GIT PULL] ARM: OMAP2+: some clock/hwmod patches for v3.19
Paul Walmsley
2
[GIT PULL] ARM: OMAP2+: some more hwmod & clock patches for v3.19
Paul Walmsley
none
Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
Wolfram Sang
none
Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
Felipe Balbi
10
[GIT PULL 2/3] omap gpmc changes for v3.19
Arnd Bergmann
2
[GIT PULL 1/2] omap non-urgent fixes for v3.19
Arnd Bergmann
1
[GIT PULL 2/2] omap prcm clean-up for v3.19
Arnd Bergmann
1
[PATCH 00/15] tz1090: add clock components
James Hogan SUPERSEDED
3
[GIT PULL 2/2] omap driver changes for v3.19
Arnd Bergmann
none
[GIT PULL 1/3] omap device tree changes for v3.19
Arnd Bergmann
none
[GIT PULL 1/2] omap soc changes for v3.19
Arnd Bergmann
none
[PATCH] ARM: DRA7: hwmod data: Add missing UART hwmod data
Nishanth Menon
1
[RFC PATCH 0/6] ARM: OMAP4+: hwmod: fixing omap4+ DSS hwmods
Tomi Valkeinen
4
[PATCHv6 0/5] hwspinlock core/omap dt support
Suman Anna PENDING · 1 of 5 reviewed
17
OMAP baseline test results for v3.18-rc5
Paul Walmsley
none
Wednesday 19 November
Re: N900 modem support in 3.18-rc1
Robert Jarzmik
none
Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5
Enric Balletbo Serra
1
[PATCH v5 0/7] Per-user clock constraints
Tomeu Vizoso SUPERSEDED
3
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help