[RFC PATCH 3/7] ARM: OMAP4+: PRM: remove "wkup" event
From: Nishanth Menon <nm@ti.com>
Date: 2014-06-06 03:35:57
Also in:
linux-arm-kernel, linux-devicetree
Subsystem:
arm port, omap powerdomain soc adaptation layer support, omap2+ support, the rest · Maintainers:
Russell King, Paul Walmsley, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
"wkup" event at bit offset 0 exists only on OMAP3. OMAP4430/60 PRM_IRQSTATUS_A9, OMAP5/DRA7 PRM_IRQSTATUS_MPU register bit 0 is DPLL_CORE_RECAL_ST not wakeup event like OMAP3. The same applies to AM437x as well. Remove the wrong definition. Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm/mach-omap2/prm44xx.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index d4d745e..1ecf244 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c@@ -32,7 +32,6 @@ /* Static data */ static const struct omap_prcm_irq omap4_prcm_irqs[] = { - OMAP_PRCM_IRQ("wkup", 0, 0), OMAP_PRCM_IRQ("io", 9, 1), };
--
1.7.9.5