Hi Benoit,

On 08/08/2012 02:50 PM, Benoit Cousson wrote:

quoted

+Required properties:
+- compatible : must be "ti,twl4030-audio"
+- ti,audio_mclk: Master clock frequency used on the board. Supported
+	         frequencies: 19200000, 26000000 and 38400000

Since you care about the frequency only you can use the generic
attribute: clock-frequency (in your example, I2C is using it).

I see, I'll use replace the property with clock-frequency.

That being said, since we do have the clock binding now, maybe we should
create a clock provider at board level for the sys_clk and thus you will
just have to create a phandle to it in your audio description.

In theory OMAP and other components will thus have to use that sys_clock
reference as well.

And in the driver I would need to do for example:
clkp = clk_get(NULL, "audio_mclk");
clk_rate = clk_get_rate(clkp);
clk_put(clkp);

to get the frequency in this way?
Note that the twl4030-audio stack itself does not handle clocks at the moment
since the clock needed for the audio module is always running (HFCLKIN ->
HFCLKOUT -> AUDIO_MCLK (USB_MCLK)). All of this is within twl4030. Do we
really want to model this?

-- 
Péter