[PATCH] ARM: OMAP: USB: fix warning on EHCI PHY reset path
From: Igor Grinberg <hidden>
Date: 2012-03-27 14:09:12
Subsystem:
omap usb support, the rest, usb ehci driver, usb subsystem · Maintainers:
Linus Torvalds, Alan Stern, Greg Kroah-Hartman
When PHY reset pin is connected to a GPIO on external GPIO chip (e.g. I2C), we should not call the gpio_set_value() function, but gpio_set_value_cansleep(). Signed-off-by: Igor Grinberg <redacted> --- This patch depends on the patch from Keshava [1]: ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue [1] http://www.spinics.net/lists/linux-omap/msg66774.html drivers/usb/host/ehci-omap.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 5c78f9e..26e9241 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c@@ -258,10 +258,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) udelay(10); if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value(pdata->reset_gpio_port[0], 1); + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value(pdata->reset_gpio_port[1], 1); + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } return 0;
--
1.7.3.4