[PATCH v4 2/3] omap3: beaglexm: fix DVI reset GPIO
From: Nishanth Menon <nm@ti.com>
Date: 2011-01-07 23:01:21
Also in:
linux-arm-kernel
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
From: Koen Kooi <redacted> GPIO reset line for Beagle XM is different from vanilla beagle so we populate it as part of gpio update routine. This in part fixes the issue of display not functioning on beagle XM platform. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <redacted> --- arch/arm/mach-omap2/board-omap3beagle.c | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1b5aa7a..d628f5e 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c@@ -199,7 +199,7 @@ static struct omap_dss_device beagle_dvi_device = { .name = "dvi", .driver_name = "generic_panel", .phy.dpi.data_lines = 24, - .reset_gpio = 170, + .reset_gpio = -EINVAL, .platform_enable = beagle_enable_dvi, .platform_disable = beagle_disable_dvi, };
@@ -308,6 +308,12 @@ static int beagle_twl_gpio_setup(struct device *dev, else gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + /* DVI reset GPIO is different between beagle revisions */ + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) + beagle_dvi_device.reset_gpio = 129; + else + beagle_dvi_device.reset_gpio = 170; + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
--
1.6.3.3