* Stephen Rothwell [off-list ref] [180717 08:03]:

Hi Tony,

On Mon, 16 Jul 2018 23:08:08 -0700 Tony Lindgren [off-list ref] wrote:

quoted

The following regression is still pending in next, see below.

* Samuel Morris [off-list ref] [180702 13:35]:

quoted

On Mon, Jul 2, 2018 at 5:32 AM, Tony Lindgren [off-list ref] wrote:  

quoted

Hi,

* Roger Quadros [off-list ref] [180621 14:56]:  

quoted

On 21/06/18 17:31, Samuel Morris wrote:  

quoted

On Thu, Jun 21, 2018 at 3:58 AM, Roger Quadros [off-list ref] wrote:  

quoted

+Rafael

On 20/06/18 18:30, Samuel Morris wrote:  

quoted

On Wed, Jun 20, 2018 at 8:58 AM, Roger Quadros [off-list ref] wrote:  

quoted

Tony,

On 20/06/18 13:29, Tony Lindgren wrote:  

quoted

Hi,

* Naresh Kamboju [off-list ref] [180620 05:55]:  

quoted

Linux next (4.18.0-rc1-next-20180619) boot failed on beagle board x15.  

Bisect points to commit aece27a2f01b ("ata: ahci_platform: allow disabling of
hotplug to save power").

Reverting the patch makes things work again. Any ideas what
might be going wrong here? Things clearly idle but then there
seems to be some register access with clocks disabled.  

So this issue is still happening as of next-20180702. Can you guys
please revert the commit above while working on a better solution?  

That's fine with me. I'm not very familiar with the process here, does
this require anything on my end? And would that require the
accompanying patch to be reverted: "ata: ahci: rpm_put port on
port_stop to match rpm_get in port_start"? There shouldn't be any
problem leaving that one in, but I just want to know before submitting
my next patch set.  

Well usually the maintainer just reverts the regression causing
patch in the related branch and that's it.

Stephen, can you please revert in next until we hear back from
Tejun?

OK, I have reverted that commit from today.  Please let me know when the
problem is fixed in the libata tree ...

Thanks!

Tony