quoted

quoted

quoted

quoted

From: Roger Tseng <redacted>

Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.

Signed-off-by: Roger Tseng <redacted>
---
 drivers/mfd/Kconfig          |  10 +
 drivers/mfd/Makefile         |   1 +
 drivers/mfd/rtsx_usb.c       | 760 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/rtsx_usb.h | 628 +++++++++++++++++++++++++++++++++++
 4 files changed, 1399 insertions(+)
 create mode 100644 drivers/mfd/rtsx_usb.c
 create mode 100644 include/linux/mfd/rtsx_usb.h

Applied again, thanks.

Would you also apply patch 2/3 and 3/3 that to make the device fully
operational for users? Or should they be applied by maintainers of
mmc/memstick subsystems?

Chris, would you give some comment?

I can apply them, but I need the other Maintainer Acks.

If they are build orthogonal i.e. there are no build dependencies
between them, it's probably better that they go into their associated
trees separately.

I think it would be better to apply them together since the later
patches really depend on the 1st one,so now we are waiting for Acks
from mmc/memstick subsystems.

When you say "depend on", do you mean as a build depenency, or won't
run without the first patch applied?

But there is no one specified for "memstick/host/" in MAINTAINERS.
Could anyone else Ack this?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog