Thread (16 messages) 16 messages, 4 authors, 2021-12-10

Re: [RFC PATCH v2 4/7] mm: make alloc_contig_range work at pageblock granularity

From: Eric Ren <hidden>
Date: 2021-12-10 08:13:03
Also in: linux-iommu, linuxppc-dev, lkml

Hi,

On 2021/12/10 07:04, Zi Yan wrote:
From: Zi Yan <ziy@nvidia.com>

alloc_contig_range() worked at MAX_ORDER-1 granularity to avoid merging
pageblocks with different migratetypes. It might unnecessarily convert
extra pageblocks at the beginning and at the end of the range. Change
alloc_contig_range() to work at pageblock granularity.

It is done by restoring pageblock types and split >pageblock_order free
pages after isolating at MAX_ORDER-1 granularity and migrating pages
away at pageblock granularity. The reason for this process is that
during isolation, some pages, either free or in-use, might have >pageblock
sizes and isolating part of them can cause free accounting issues.
Could you elaborate on how the acconting issue would happen in details?

quoted hunk ↗ jump to hunk
Restoring the migratetypes of the pageblocks not in the interesting
range later is much easier.

Signed-off-by: Zi Yan <ziy@nvidia.com>
---
  mm/page_alloc.c | 169 ++++++++++++++++++++++++++++++++++++++++++------
  1 file changed, 149 insertions(+), 20 deletions(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 107a5f186d3b..5ffbeb1b7512 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -8981,8 +8981,8 @@ struct page *has_unmovable_pages(struct zone *zone, struct page *page,
  #ifdef CONFIG_CONTIG_ALLOC
  static unsigned long pfn_max_align_down(unsigned long pfn)
  {
-	return pfn & ~(max_t(unsigned long, MAX_ORDER_NR_PAGES,
-			     pageblock_nr_pages) - 1);
+	return ALIGN_DOWN(pfn, max_t(unsigned long, MAX_ORDER_NR_PAGES,
+				     pageblock_nr_pages));
  }
  
  static unsigned long pfn_max_align_up(unsigned long pfn)
@@ -9071,6 +9071,52 @@ static int __alloc_contig_migrate_range(struct compact_control *cc,
  	return 0;
  }
  
+static inline int save_migratetypes(unsigned char *migratetypes,
+				unsigned long start_pfn, unsigned long end_pfn)
+{
+	unsigned long pfn = start_pfn;
+	int num = 0;
+
+	while (pfn < end_pfn) {
+		migratetypes[num] = get_pageblock_migratetype(pfn_to_page(pfn));
+		num++;
+		pfn += pageblock_nr_pages;
+	}
+	return num;
+}
+
+static inline int restore_migratetypes(unsigned char *migratetypes,
+				unsigned long start_pfn, unsigned long end_pfn)
+{
+	unsigned long pfn = start_pfn;
+	int num = 0;
+
+	while (pfn < end_pfn) {
+		set_pageblock_migratetype(pfn_to_page(pfn), migratetypes[num]);
+		num++;
+		pfn += pageblock_nr_pages;
+	}
+	return num;
+}
+
+static inline void split_free_page_into_pageblocks(struct page *free_page,
+				int order, struct zone *zone)
+{
+	unsigned long pfn;
+
+	spin_lock(&zone->lock);
+	del_page_from_free_list(free_page, zone, order);
+	for (pfn = page_to_pfn(free_page);
+	     pfn < page_to_pfn(free_page) + (1UL << order);
+	     pfn += pageblock_nr_pages) {
+		int mt = get_pfnblock_migratetype(pfn_to_page(pfn), pfn);
+
+		__free_one_page(pfn_to_page(pfn), pfn, zone, pageblock_order,
+				mt, FPI_NONE);
+	}
+	spin_unlock(&zone->lock);
+}
+
  /**
   * alloc_contig_range() -- tries to allocate given range of pages
   * @start:	start PFN to allocate
@@ -9096,8 +9142,15 @@ int alloc_contig_range(unsigned long start, unsigned long end,
  		       unsigned migratetype, gfp_t gfp_mask)
  {
  	unsigned long outer_start, outer_end;
+	unsigned long isolate_start = pfn_max_align_down(start);
+	unsigned long isolate_end = pfn_max_align_up(end);
+	unsigned long alloc_start = ALIGN_DOWN(start, pageblock_nr_pages);
+	unsigned long alloc_end = ALIGN(end, pageblock_nr_pages);
What is the differecence between isolate_* and alloc_*?
quoted hunk ↗ jump to hunk
+	unsigned long num_pageblock_to_save;
  	unsigned int order;
  	int ret = 0;
+	unsigned char *saved_mt;
+	int num;
  
  	struct compact_control cc = {
  		.nr_migratepages = 0,
@@ -9111,11 +9164,30 @@ int alloc_contig_range(unsigned long start, unsigned long end,
  	};
  	INIT_LIST_HEAD(&cc.migratepages);
  
+	/*
+	 * TODO: make MIGRATE_ISOLATE a standalone bit to avoid overwriting
+	 * the exiting migratetype. Then, we will not need the save and restore
+	 * process here.
+	 */
+
+	/* Save the migratepages of the pageblocks before start and after end */
+	num_pageblock_to_save = (alloc_start - isolate_start) / pageblock_nr_pages
+				+ (isolate_end - alloc_end) / pageblock_nr_pages;
+	saved_mt =
+		kmalloc_array(num_pageblock_to_save,
+			      sizeof(unsigned char), GFP_KERNEL);
+	if (!saved_mt)
+		return -ENOMEM;
+
+	num = save_migratetypes(saved_mt, isolate_start, alloc_start);
+
+	num = save_migratetypes(&saved_mt[num], alloc_end, isolate_end);
the two lines above looks confusing to figure out the logic. Could you 
help explain a bit?

Thanks,
Eric
quoted hunk ↗ jump to hunk
+
  	/*
  	 * What we do here is we mark all pageblocks in range as
  	 * MIGRATE_ISOLATE.  Because pageblock and max order pages may
  	 * have different sizes, and due to the way page allocator
-	 * work, we align the range to biggest of the two pages so
+	 * work, we align the isolation range to biggest of the two so
  	 * that page allocator won't try to merge buddies from
  	 * different pageblocks and change MIGRATE_ISOLATE to some
  	 * other migration type.
@@ -9125,6 +9197,20 @@ int alloc_contig_range(unsigned long start, unsigned long end,
  	 * we are interested in).  This will put all the pages in
  	 * range back to page allocator as MIGRATE_ISOLATE.
  	 *
+	 * Afterwards, we restore the migratetypes of the pageblocks not
+	 * in range, split free pages spanning outside the range,
+	 * and put split free pages (at pageblock_order) to the right
+	 * migratetype list.
+	 *
+	 * NOTE: the above approach is used because it can cause free
+	 * page accounting issues during isolation, if a page, either
+	 * free or in-use, contains multiple pageblocks and we only
+	 * isolate a subset of them. For example, if only the second
+	 * pageblock is isolated from a page with 2 pageblocks, after
+	 * the page is free, it will be put in the first pageblock
+	 * migratetype list instead of having 2 pageblocks in two
+	 * separate migratetype lists.
+	 *
  	 * When this is done, we take the pages in range from page
  	 * allocator removing them from the buddy system.  This way
  	 * page allocator will never consider using them.
@@ -9135,10 +9221,9 @@ int alloc_contig_range(unsigned long start, unsigned long end,
  	 * put back to page allocator so that buddy can use them.
  	 */
  
-	ret = start_isolate_page_range(pfn_max_align_down(start),
-				       pfn_max_align_up(end), migratetype, 0);
+	ret = start_isolate_page_range(isolate_start, isolate_end, migratetype, 0);
  	if (ret)
-		return ret;
+		goto done;
  
  	drain_all_pages(cc.zone);
  
@@ -9174,6 +9259,19 @@ int alloc_contig_range(unsigned long start, unsigned long end,
  	 * isolated thus they won't get removed from buddy.
  	 */
  
+	/*
+	 * Restore migratetypes of pageblocks outside [start, end)
+	 * TODO: remove it when MIGRATE_ISOLATE becomes a standalone bit
+	 */
+
+	num = restore_migratetypes(saved_mt, isolate_start, alloc_start);
+
+	num = restore_migratetypes(&saved_mt[num], alloc_end, isolate_end);
+
+	/*
+	 * Split free page spanning [isolate_start, alloc_start) and put the
+	 * pageblocks in the right migratetype lists.
+	 */
  	order = 0;
  	outer_start = start;
  	while (!PageBuddy(pfn_to_page(outer_start))) {
@@ -9188,37 +9286,68 @@ int alloc_contig_range(unsigned long start, unsigned long end,
  		order = buddy_order(pfn_to_page(outer_start));
  
  		/*
-		 * outer_start page could be small order buddy page and
-		 * it doesn't include start page. Adjust outer_start
-		 * in this case to report failed page properly
-		 * on tracepoint in test_pages_isolated()
+		 * split the free page has start page and put the pageblocks
+		 * in the right migratetype list
  		 */
-		if (outer_start + (1UL << order) <= start)
-			outer_start = start;
+		if (outer_start + (1UL << order) > start) {
+			struct page *free_page = pfn_to_page(outer_start);
+
+			split_free_page_into_pageblocks(free_page, order, cc.zone);
+		}
+	}
+
+	/*
+	 * Split free page spanning [alloc_end, isolate_end) and put the
+	 * pageblocks in the right migratetype list
+	 */
+	order = 0;
+	outer_end = end;
+	while (!PageBuddy(pfn_to_page(outer_end))) {
+		if (++order >= MAX_ORDER) {
+			outer_end = end;
+			break;
+		}
+		outer_end &= ~0UL << order;
+	}
+
+	if (outer_end != end) {
+		order = buddy_order(pfn_to_page(outer_end));
+
+		/*
+		 * split the free page has start page and put the pageblocks
+		 * in the right migratetype list
+		 */
+		VM_BUG_ON(outer_end + (1UL << order) <= end);
+		{
+			struct page *free_page = pfn_to_page(outer_end);
+
+			split_free_page_into_pageblocks(free_page, order, cc.zone);
+		}
  	}
  
  	/* Make sure the range is really isolated. */
-	if (test_pages_isolated(outer_start, end, 0)) {
+	if (test_pages_isolated(alloc_start, alloc_end, 0)) {
  		ret = -EBUSY;
  		goto done;
  	}
  
  	/* Grab isolated pages from freelists. */
-	outer_end = isolate_freepages_range(&cc, outer_start, end);
+	outer_end = isolate_freepages_range(&cc, alloc_start, alloc_end);
  	if (!outer_end) {
  		ret = -EBUSY;
  		goto done;
  	}
  
  	/* Free head and tail (if any) */
-	if (start != outer_start)
-		free_contig_range(outer_start, start - outer_start);
-	if (end != outer_end)
-		free_contig_range(end, outer_end - end);
+	if (start != alloc_start)
+		free_contig_range(alloc_start, start - alloc_start);
+	if (end != alloc_end)
+		free_contig_range(end, alloc_end - end);
  
  done:
-	undo_isolate_page_range(pfn_max_align_down(start),
-				pfn_max_align_up(end), migratetype);
+	kfree(saved_mt);
+	undo_isolate_page_range(alloc_start,
+				alloc_end, migratetype);
  	return ret;
  }
  EXPORT_SYMBOL(alloc_contig_range);
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help