Thread (7 messages) flat view 7 messages, 2 authors, 2024-09-13
STALE721d REVIEWED: 5 (4M)

Revision v6 of 8 in this series; 2 review trailers (1 from subsystem maintainers).

Revisions (8)
  1. v3 [diff vs current]
  2. v4 [diff vs current]
  3. v5 [diff vs current]
  4. v6 current
  5. v7 [diff vs current]
  6. v8 [diff vs current]
  7. v9 [diff vs current]
  8. v10 [diff vs current]

[PATCH v6 1/2] ufs: core: fix the issue of ICU failure

From: <peter.wang@mediatek.com>
Date: 2024-09-11 09:56:36
Also in: linux-scsi, stable
Subsystem: scsi subsystem, the rest, universal flash storage host controller driver · Maintainers: "James E.J. Bottomley", "Martin K. Petersen", Linus Torvalds

From: Peter Wang <peter.wang@mediatek.com>

When setting the ICU bit without using read-modify-write,
SQRTCy will restart SQ again and receive an RTC return
error code 2 (Failure - SQ not stopped).

Additionally, the error log has been modified so that
this type of error can be observed.

Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bao D. Nguyen <redacted>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/ufs/core/ufs-mcq.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
index 5891cdacd0b3..3903947dbed1 100644
--- a/drivers/ufs/core/ufs-mcq.c
+++ b/drivers/ufs/core/ufs-mcq.c
@@ -539,7 +539,7 @@ int ufshcd_mcq_sq_cleanup(struct ufs_hba *hba, int task_tag)
 	struct scsi_cmnd *cmd = lrbp->cmd;
 	struct ufs_hw_queue *hwq;
 	void __iomem *reg, *opr_sqd_base;
-	u32 nexus, id, val;
+	u32 nexus, id, val, rtc;
 	int err;
 
 	if (hba->quirks & UFSHCD_QUIRK_MCQ_BROKEN_RTC)
@@ -569,17 +569,18 @@ int ufshcd_mcq_sq_cleanup(struct ufs_hba *hba, int task_tag)
 	opr_sqd_base = mcq_opr_base(hba, OPR_SQD, id);
 	writel(nexus, opr_sqd_base + REG_SQCTI);
 
-	/* SQRTCy.ICU = 1 */
-	writel(SQ_ICU, opr_sqd_base + REG_SQRTC);
+	/* Initiate Cleanup */
+	writel(readl(opr_sqd_base + REG_SQRTC) | SQ_ICU,
+		opr_sqd_base + REG_SQRTC);
 
 	/* Poll SQRTSy.CUS = 1. Return result from SQRTSy.RTC */
 	reg = opr_sqd_base + REG_SQRTS;
 	err = read_poll_timeout(readl, val, val & SQ_CUS, 20,
 				MCQ_POLL_US, false, reg);
-	if (err)
-		dev_err(hba->dev, "%s: failed. hwq=%d, tag=%d err=%ld\n",
-			__func__, id, task_tag,
-			FIELD_GET(SQ_ICU_ERR_CODE_MASK, readl(reg)));
+	rtc = FIELD_GET(SQ_ICU_ERR_CODE_MASK, readl(reg));
+	if (err || rtc)
+		dev_err(hba->dev, "%s: failed. hwq=%d, tag=%d err=%d RTC=%d\n",
+			__func__, id, task_tag, err, rtc);
 
 	if (ufshcd_mcq_sq_start(hba, hwq))
 		err = -ETIMEDOUT;
-- 
2.45.2

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help