On Thu, 2021-11-04 at 15:39 +0000, Mark Brown wrote:

On Wed, Nov 03, 2021 at 06:00:39PM +0800, Trevor Wu wrote:

quoted

Because we will add DSP support, an new machine driver for the same
board is required. BE and codec configuration will use the same
code
when machine driver is designed for the same board.

I don't follow why the DSP support requires a new driver?  Shouldn't
all
systems with the DSP present be using it?

We need to keep the solution without DSP, so we can replace DSP
solution with non-DSP when it's required. But when we introduce SOF for
DSP control, there will be more routes in machine driver and device
tree usage is different from the original. So it's hard to share the
same driver for these two solutions.

Thanks,
Trevor

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek