Re: [PATCH v10 3/5] spmi: mediatek: Add support for MT6873/8192
From: Stephen Boyd <sboyd@kernel.org>
Date: 2021-08-09 17:55:12
Also in:
linux-arm-kernel, linux-devicetree, lkml
Quoting Hsin-Hsiung Wang (2021-08-02 23:34:19)
quoted hunk ↗ jump to hunk
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c new file mode 100644 index 000000000000..94c45d46ab0c --- /dev/null +++ b/drivers/spmi/spmi-mtk-pmif.c@@ -0,0 +1,465 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2021 MediaTek Inc. + +#include <linux/clk.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_device.h>
include platform_device.h for the platform device driver that this is.
+#include <linux/spmi.h>
+
+#define SWINF_IDLE 0x00
+#define SWINF_WFVLDCLR 0x06
+
+#define GET_SWINF(x) (((x) >> 1) & 0x7)
+
+#define PMIF_CMD_REG_0 0
+#define PMIF_CMD_REG 1
+#define PMIF_CMD_EXT_REG 2
+#define PMIF_CMD_EXT_REG_LONG 3
+
+#define PMIF_DELAY_US 10
+#define PMIF_TIMEOUT_US (10 * 1000)
+
+#define PMIF_CHAN_OFFSET 0x5
+
+#define PMIF_MAX_CLKS 3
+
+#define SPMI_OP_ST_BUSY 1
+
+struct ch_reg {
+ u32 ch_sta;
+ u32 wdata;
+ u32 rdata;
+ u32 ch_send;
+ u32 ch_rdy;
+};
+
+struct pmif_data {
+ const u32 *regs;
+ const u32 *spmimst_regs;
+ u32 soc_chan;
+};
+
+struct pmif {
+ void __iomem *base;
+ void __iomem *spmimst_base;
+ struct ch_reg chan;
+ struct clk_bulk_data clks[PMIF_MAX_CLKS];
+ u32 nclks;size_t? Surely 32-bits isn't important.
+ const struct pmif_data *data;
+};
+
+static const char * const pmif_clock_names[] = {
+ "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux",
+};[...]
+
+static bool pmif_is_fsm_vldclr(struct pmif *arb)
+{
+ u32 reg_rdata;
+
+ reg_rdata = pmif_readl(arb, arb->chan.ch_sta);Newline here please.
+ return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
+}
+
+static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ u32 rdata, cmd;
+ int ret;
+
+ /* Check the opcode */
+ if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
+ return -EINVAL;
+
+ cmd = opc - SPMI_CMD_RESET;
+
+ mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
+ ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA],
+ rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0)
+ dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
+
+ return ret;
+}
+
+static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, u8 *buf, size_t len)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ struct ch_reg *inf_reg;
+ int ret;
+ u32 data, cmd;
+
+ /* Check for argument validation. */
+ if (sid & ~0xf) {
+ dev_err(&ctrl->dev, "exceed the max slv id\n");
+ return -EINVAL;
+ }
+
+ if (len > 4) {
+ dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);Missing newline
+ return -EINVAL;
+ }
+
+ if (opc >= 0x60 && opc <= 0x7f)
+ opc = PMIF_CMD_REG;
+ else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f))
+ opc = PMIF_CMD_EXT_REG_LONG;
+ else
+ return -EINVAL;
+
+ /* Wait for Software Interface FSM state to be IDLE. */
+ inf_reg = &arb->chan;
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_IDLE,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ /* set channel ready if the data has transferred */
+ if (pmif_is_fsm_vldclr(arb))
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+ dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+ goto out;
+ }
+
+ /* Send the command. */
+ cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr;
+ pmif_writel(arb, cmd, inf_reg->ch_send);
+
+ /*
+ * Wait for Software Interface FSM state to be WFVLDCLR,
+ * read the data and clear the valid flag.
+ */
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_WFVLDCLR,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
+ goto out;
+ }
+
+ data = pmif_readl(arb, inf_reg->rdata);
+ memcpy(buf, &data, len);
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+
+out:
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, const u8 *buf, size_t len)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ struct ch_reg *inf_reg;
+ int ret;
+ u32 data, cmd;
+
+ if (len > 4) {
+ dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);Missing newline
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc >= 0x40 && opc <= 0x5F)
+ opc = PMIF_CMD_REG;
+ else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37))
+ opc = PMIF_CMD_EXT_REG_LONG;
+ else if (opc >= 0x80)
+ opc = PMIF_CMD_REG_0;
+ else
+ return -EINVAL;
+
+ /* Wait for Software Interface FSM state to be IDLE. */
+ inf_reg = &arb->chan;
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_IDLE,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ /* set channel ready if the data has transferred */
+ if (pmif_is_fsm_vldclr(arb))
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+ dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+ goto out;
+ }
+
+ /* Set the write data. */
+ memcpy(&data, buf, len);
+ pmif_writel(arb, data, inf_reg->wdata);
+
+ /* Send the command. */
+ cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr;
+ pmif_writel(arb, cmd, inf_reg->ch_send);
+
+out:
+ if (ret < 0)
+ return ret;
+
+ return 0;Simplify to out: return ret;
+}
+
+static const struct pmif_data mt6873_pmif_arb = {
+ .regs = mt6873_regs,
+ .spmimst_regs = mt6873_spmi_regs,
+ .soc_chan = 2,
+};
+
+static int mtk_spmi_probe(struct platform_device *pdev)
+{
+ struct pmif *arb;
+ struct spmi_controller *ctrl;
+ int err, i;
+ u32 chan_offset;
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb));
+ if (!ctrl)
+ return -ENOMEM;
+
+ arb = spmi_controller_get_drvdata(ctrl);
+ arb->data = of_device_get_match_data(&pdev->dev);Use device_get_match_data() instead please.
+ if (!arb->data) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "Cannot get drv_data\n");
+ goto err_put_ctrl;
+ }
+
+ arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif");
+ if (IS_ERR(arb->base)) {
+ err = PTR_ERR(arb->base);
+ dev_err(&pdev->dev, "pmif failed to get the remappped memory\n");Please drop print as the API already prints errors for every problem.
+ goto err_put_ctrl;
+ }
+
+ arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst");
+ if (IS_ERR(arb->spmimst_base)) {
+ err = PTR_ERR(arb->spmimst_base);
+ dev_err(&pdev->dev, "spmimst failed to get the remappped memory\n");Please drop print as the API already prints errors for every problem.
+ goto err_put_ctrl;
+ }
+
+ arb->nclks = ARRAY_SIZE(pmif_clock_names);
+ if (arb->nclks > PMIF_MAX_CLKS) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "exceed the max clock numbers\n");Do we really care? The dt schema should be checking this instead of the driver.
+ goto err_put_ctrl; + } + + for (i = 0; i < arb->nclks; i++) + arb->clks[i].id = pmif_clock_names[i]; +
_______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek