The difference between RAWIP and PUREIP is that they generate IPv6
link-local address and IPv6 global address in different ways.

RAWIP:
~~~~~~
In the ipv6_generate_eui64() function, using RAWIP will always return 0,
which will cause the kernel to automatically generate an IPv6 link-local
address in EUI64 format and an IPv6 global address in EUI64 format.

PUREIP:
~~~~~~~
After this patch set, when using PUREIP, kernel doesn't generate IPv6
link-local address regardless of which IN6_ADDR_GEN_MODE is used.

@@  static void addrconf_dev_config(struct net_device *dev)
+       if (dev->type == ARPHRD_PUREIP)
+               return;

And after recving RA message, kernel iterates over the link-local address
that exists for the interface and uses the low 64bits of the link-local
address to generate the IPv6 global address.
The general process is as follows:
ndisc_router_discovery() -> addrconf_prefix_rcv() -> ipv6_generate_eui64() -> ipv6_inherit_eui64()