On Wed, Apr 28, 2021 at 02:54:36PM +0800, Roger Lu wrote:

The Smart Voltage Scaling(SVS) engine is a piece of hardware
which calculates suitable SVS bank voltages to OPP voltage table.
Then, DVFS driver could apply those SVS bank voltages to PMIC/Buck
when receiving OPP_EVENT_ADJUST_VOLTAGE.

Signed-off-by: Roger Lu <redacted>
---
 drivers/soc/mediatek/Kconfig   |   10 +
 drivers/soc/mediatek/Makefile  |    1 +
 drivers/soc/mediatek/mtk-svs.c | 1723 ++++++++++++++++++++++++++++++++
 3 files changed, 1734 insertions(+)
 create mode 100644 drivers/soc/mediatek/mtk-svs.c

[ ... ]

+
+	svsp_irq = irq_of_parse_and_map(svsp->dev->of_node, 0);
+	ret = devm_request_threaded_irq(svsp->dev, svsp_irq, NULL, svs_isr,
+					svsp->irqflags, svsp->name, svsp);

0-day reports:

drivers/soc/mediatek/mtk-svs.c:1663:7-32: ERROR:
	Threaded IRQ with no primary handler requested without IRQF_ONESHOT

I would be a bit concerned about this. There is no primary (hard)
interrupt handler, meaning the hard interrupt may be re-enabled after
the default hard interrupt handler runs. This might result in endless
interrupts.

Guenter

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek