Re: [v7,1/7] dt-bindings: PCI: mediatek-gen3: Add YAML schema
From: Rob Herring <robh@kernel.org>
Date: 2021-01-25 20:25:24
Also in:
linux-arm-kernel, linux-devicetree, linux-pci, lkml
On Wed, Jan 13, 2021 at 07:39:55PM +0800, Jianjun Wang wrote:
quoted hunk ↗ jump to hunk
Add YAML schemas documentation for Gen3 PCIe controller on MediaTek SoCs. Signed-off-by: Jianjun Wang <redacted> Acked-by: Ryder Lee <ryder.lee@mediatek.com> --- .../bindings/pci/mediatek-pcie-gen3.yaml | 172 ++++++++++++++++++ 1 file changed, 172 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yamldiff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml new file mode 100644 index 000000000000..f133fb0184f1 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml@@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gen3 PCIe controller on MediaTek SoCs + +maintainers: + - Jianjun Wang <jianjun.wang@mediatek.com> + +description: |+ + PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed + and compatible with Gen2, Gen1 speed. + + This PCIe controller supports up to 256 MSI vectors, the MSI hardware + block diagram is as follows: + + +-----+ + | GIC | + +-----+ + ^ + | + port->irq + | + +-+-+-+-+-+-+-+-+ + |0|1|2|3|4|5|6|7| (PCIe intc) + +-+-+-+-+-+-+-+-+ + ^ ^ ^ + | | ... | + +-------+ +------+ +-----------+ + | | | + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets) + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ + | | | | | | | | | | | | (MSI vectors) + | | | | | | | | | | | | + + (MSI SET0) (MSI SET1) ... (MSI SET7) + + With 256 MSI vectors supported, the MSI vectors are composed of 8 sets, + each set has its own address for MSI message, and supports 32 MSI vectors + to generate interrupt. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: mediatek,mt8192-pcie + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ranges: + minItems: 1 + maxItems: 8 + + resets: + minItems: 1 + maxItems: 2
Why the range? The SoC either has the reset lines or it doesn't.
+ + reset-names: + anyOf: + - const: mac + - const: phy
I don't think this should stay, but if so, better expressed like this: minItems: 1 maxItems: 2 items: enum: [ mac, phy ]
+
+ clocks:
+ maxItems: 6
+
+ clock-names:
+ items:
+ - const: pl_250m
+ - const: tl_26m
+ - const: tl_96m
+ - const: tl_32k
+ - const: peri_26m
+ - const: top_133m
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+ '#interrupt-cells':
+ const: 1
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ranges
+ - clocks
+ - '#interrupt-cells'
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie: pcie@11230000 {
+ compatible = "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x00 0x11230000 0x00 0x4000>;
+ reg-names = "pcie-mac";Not documented. Drop.
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0x00 0x12000000 0x00
+ 0x12000000 0x00 0x1000000>;
+ clocks = <&infracfg 44>,
+ <&infracfg 40>,
+ <&infracfg 43>,
+ <&infracfg 97>,
+ <&infracfg 99>,
+ <&infracfg 111>;
+ clock-names = "pl_250m", "tl_26m", "tl_96m",
+ "tl_32k", "peri_26m", "top_133m";
+ assigned-clocks = <&topckgen 50>;
+ assigned-clock-parents = <&topckgen 91>;
+
+ phys = <&pciephy>;
+ phy-names = "pcie-phy";
+ resets = <&infracfg_rst 0>;
+ reset-names = "phy";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
--
2.25.1_______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek