Thread (5 messages) flat view 5 messages, 3 authors, 2021-01-26
STALE2065d REVIEWED: 1 (0M)

1 review trailer.

[PATCH v3 1/2] arm64: dts: mt8183: config dsi node

From: Hsin-Yi Wang <hidden>
Date: 2021-01-13 06:29:40
Also in: linux-arm-kernel, linux-devicetree, lkml
Subsystem: arm/mediatek soc support, the rest · Maintainers: Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds

Config dsi node for mt8183 kukui. Set panel and ports.

Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.

Signed-off-by: Hsin-Yi Wang <redacted>
Reviewed-by: Nicolas Boichat <redacted>
---
 .../mediatek/mt8183-kukui-krane-sku176.dts    |  5 +++
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 37 +++++++++++++++++++
 2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 47113e275cb52..721d16f9c3b4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -16,3 +16,8 @@ / {
 	model = "MediaTek krane sku176 board";
 	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
 };
+
+&panel {
+        status = "okay";
+        compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd30..c5f41b94f154e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,35 @@ &cpu7 {
 	proc-supply = <&mt6358_vproc11_reg>;
 };
 
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port {
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -547,6 +576,14 @@ pins_clk {
 		};
 	};
 
+	panel_pins_default: panel_pins_default {
+		panel_reset {
+			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+
 	pwm0_pin_default: pwm0_pin_default {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help