[PATCH v2 3/3] arm64: dts: qcom: kodiak: add CSI2 D-PHY common-phy providers

From
Anusha Arun Nandi <hidden>
Date
2026-11-03 22:10:34
Also in
linux-arm-msm, linux-phy, lkml
Reply to
Anusha Arun Nandi, 2026-11-03
Expose SC7280's five CSIPHYs as standalone
qcom,sc7280-csi2-phy generic-PHY provider nodes (csiphy0..4) at their
existing register addresses, each with its own OF graph (port@0
sensor-facing, port@1 CAMSS-facing) so camss_detect_legacy_phy() picks
the non-legacy path once a board wires a sensor through one of them.
The camss node's own reg-names/clocks/interrupts for the CSIPHYs are
unchanged, so boards that don't use a provider still get the legacy
binding.

The provider nodes are disabled by default; a board or camera overlay
enables the one(s) it uses.

Reviewed-by: Jigarkumar Zala <redacted>
Signed-off-by: Anusha Arun Nandi <redacted>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi | 172 +++++++++++++++++++++++++++
 1 file changed, 172 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index 8c7523602d27..3f3a41cfaa00 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -5164,6 +5164,178 @@ cci1_i2c1: i2c-bus@1 {
 			};
 		};
 
+		csiphy0: phy@ace0000 {
+			compatible = "qcom,sc7280-csi2-phy";
+			reg = <0x0 0x0ace0000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy1: phy@ace2000 {
+			compatible = "qcom,sc7280-csi2-phy";
+			reg = <0x0 0x0ace2000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy2: phy@ace4000 {
+			compatible = "qcom,sc7280-csi2-phy";
+			reg = <0x0 0x0ace4000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy3: phy@ace6000 {
+			compatible = "qcom,sc7280-csi2-phy";
+			reg = <0x0 0x0ace6000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy4: phy@ace8000 {
+			compatible = "qcom,sc7280-csi2-phy";
+			reg = <0x0 0x0ace8000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy_opp_table: opp-table-csiphy {
+			compatible = "operating-points-v2";
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+
 		camss: isp@acb3000 {
 			compatible = "qcom,sc7280-camss";
 
-- 
2.34.1
Thread (6 messages) 6 messages, 2 authors, last reply 13d ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help