Thread (6 messages) 6 messages, 1 author, 2021-07-12

[PATCH v7 0/5] Add support for the Hynix Hi-846 camera

flat view
STALE1925d SUPERSEDED

From: Martin Kepplinger <hidden>
Date: 2021-07-12 09:06:00
Also in: linux-devicetree, lkml, phone-devel

Revision v7 of 9 in this series.

Revisions (9)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]
  6. v6 [diff vs current]
  7. v7 current
  8. v8 [diff vs current]
  9. v9 [diff vs current]
hi,

patch 1, 2 and 3 add support for the SK Hynix Hi-846 CMOS images sensor.
It includes the dt-bindings and the driver.

Patches 4 and 5 are optional and don't have to hold patch 1-3 back:
if i2c-cardlist is deprecated, ignore it and act on it appropriately;
and the arm64 defconfig is just convenience for now.

best wishes,

                              martin

revision history
----------------
v7: (thank you Sakari)
* move the check for supported nr_lanes for a mode to set_format()
* change get_selection() according to the Sakaris' review
* check for the mipi link frequencies from DT
* check for the external clock rate and add assigned-clock-rates requirement

v6:
* better digital gain defaults
* lane config fix found by smatch
* fix regulator usage in power_on()
* https://lore.kernel.org/linux-media/20210628101054.828579-1-martin.kepplinger@puri.sm/ (local)

v5: (thank you Laurent and Rob)
* minor dt-bindings fixes
* driver: disable lens shading correcting (no seed values yet used from "otp" for that)
* add reviewed-tags
* https://lore.kernel.org/linux-media/20210611101404.2553818-1-martin.kepplinger@puri.sm/ (local)

v4: (thank you Laurent, Sakari and Rob) many driver changes, see v3 review for
details. they include:
* add get_selection(), remove open() callback
* use gpiod API
* use regulator_bulk API
* fix power supply timing sequence and bindings
* https://lore.kernel.org/linux-media/20210607105213.1211722-1-martin.kepplinger@puri.sm/ (local)

v3: (thank you, Laurent)
* use do_div() for divisions
* reset-gpios DT property name instead of rst-gpios
* improve the dt-bindings
* add the phone-devel list
* https://lore.kernel.org/linux-media/20210531120737.168496-1-martin.kepplinger@puri.sm/ (local)

v2:
sent a bit early due to stupid mistakes
* fix build issues
* fix dtschema issues
* add enable for arm64 defconfig
* https://lore.kernel.org/linux-media/20210530212337.GA15366@duo.ucw.cz/T/#t (local)

v1:
* https://lore.kernel.org/linux-media/20210527091221.3335998-1-martin.kepplinger@puri.sm/ (local)


Martin Kepplinger (5):
  dt-bindings: vendor-prefixes: Add SK Hynix Inc.
  dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel
    sensor
  media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera
  Documentation: i2c-cardlist: add the Hynix hi846 sensor
  arm64: defconfig: enable VIDEO_HI846

 .../admin-guide/media/i2c-cardlist.rst        |    1 +
 .../bindings/media/i2c/hynix,hi846.yaml       |  120 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 MAINTAINERS                                   |    6 +
 arch/arm64/configs/defconfig                  |    1 +
 drivers/media/i2c/Kconfig                     |   13 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/hi846.c                     | 2178 +++++++++++++++++
 8 files changed, 2322 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
 create mode 100644 drivers/media/i2c/hi846.c

-- 
2.30.2
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help