Re: [Xen-devel] RIP MTRR - status update for upcoming v4.2

From
Luis R. Rodriguez <hidden>
Date
2015-08-07 20:25:46
Also in
linux-fbdev, linux-pci, lkml
Reply to
Toshi Kani, 2015-08-06
On Thu, Aug 6, 2015 at 3:58 PM, Toshi Kani [off-list ref] wrote:
On Thu, 2015-08-06 at 12:53 -0700, Luis R. Rodriguez wrote:
quoted
On Fri, Jun 12, 2015 at 9:58 AM, Toshi Kani [off-list ref] wrote:
quoted
On Fri, 2015-06-12 at 08:59 +0100, Jan Beulich wrote:
quoted
quoted
quoted
quoted
On 12.06.15 at 01:23, [off-list ref] wrote:
There are two usages on MTRRs:
 1) MTRR entries set by firmware
 2) MTRR entries set by OS drivers

We can obsolete 2), but we have no control over 1).  As UEFI
firmwares
also set this up, this usage will continue to stay.  So, we should
not
get rid of the MTRR code that looks up the MTRR entries, while we
have
no need to modify them.

Such MTRR entries provide safe guard to /dev/mem, which allows
privileged user to access a range that may require UC mapping while
the /dev/mem driver blindly maps it with WB.  MTRRs converts WB to
UC in
such a case.
But it wouldn't be impossible to simply read the MTRRs upon boot,
store the information, disable MTRRs, and correctly use PAT to
achieve the same effect (i.e. the "blindly maps" part of course
would need fixing).
It could be done, but I do not see much benefit of doing it.  One of the
reasons platform vendors set MTRRs is so that a system won't hit a
machine check when an OS bug leads an access with a wrong cache type.

A machine check is hard to analyze and can be seen as a hardware issue
by customers.  Emulating MTRRs with PAT won't protect from such a bug.
That's seems like a fair and valid concern. This could only happen if
the OS would have code that would use MTRR, in the case of Linux we'll
soon be able to vet that this cannot happen.
No, there is no OS support necessary to use MTRR.  After firmware sets it
up, CPUs continue to use it without any OS support.  I think the Linux
change you are referring is to obsolete legacy interfaces that modify the
MTRR setup.  I agree that Linux should not modify MTRR.
Its a bit more than that though. Since you agree that the OS can live
without MTRR code I was hoping to then see if we can fold out PAT
Linux code from under the MTRR dependency on Linux and make PAT a
first class citizen, maybe at least for x86-64. Right now you can only
get PAT support on Linux if you have MTRR code, but I'd like to see if
instead we can rip MTRR code out completely under its own Kconfig and
let it start rotting away.

Code-wise the only issue I saw was that PAT code also relies on
mtrr_type_lookup(), see pat_x_mtrr_type(), but other than this I found
no other obvious issues.

Platform firmware and SMIs seems to be the only other possible issue.
More on this below.
quoted
For those type of OSes...
could it be possible to negotiate or hint to the platform through an
attribute somehow that the OS has such capability to not use MTRR?
The OS can disable MTRR.  However, this can also cause a problem in
firmware, which may rely on MTRR.
Can you describe what type of issues we could expect ? I tend to care
more about this for 64-bit systems so if 32-bit platforms would be
more of the ones which could cause an issue would restricting
disabling MTRR only for 64-bit help?
quoted
Then, only if this bit is set, the platform could then avoid such MTRR
settings, and if we have issues you can throw rocks at us.
quoted
And if that's not possible how about a new platform setting that would
need to be set at the platform level to enable disabling this junk?
Then only folks who know what they are doing would enable it, and if
the customer set it, the issue would not be on the platform.
quoted
Could this also be used to prevent SMIs with MTRRs?
ACPI _OSI could be used for firmware to implement some OS-specific features,
but it may be too late for firmware to make major changes and is generally
useless unless OS requirements are described in a spec backed by logo
certification.
I see.. So there are no guarantees that platform firmware would not
expect OS MTRR support.
 SMIs are also used for platform management, such as fan
speed control.
And its conceivable that some devices, or the platform itself, may
trigger SMIs to have the platform firmware poke with MTRRs?
Is there any issue for Linux to use MTRR set by firmware?
Even though we don't have the Kconfig option right now to disable MTRR
cod explicitly I'll note that there are a few other cases that could
flip Linux to note use MTRR:

  a) Some BIOSes could let MTRR get disabled
  b) As of Xen 4.4, the hypervisor disables X86_FEATURE_MTRR which
disables MTRR on Linux

If these environments can exist it'd be good to understand possible
issues that could creep up as a result of the OS not having MTRR
enabled. If this is a reasonable thing for x86-64 I was hoping we
could just let users opt-in to a similar build configuration through
the OS by letting PAT not depend on MTRR.

 Luis
Thread (20 messages) 20 messages, 7 authors, last reply 2015-08-07
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help