---
 Documentation/devicetree/bindings/media/i2c/adv7604.txt |    3 +++
 drivers/media/i2c/adv7604.c                             |    8 +++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 7eafdbc..8337f75 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt

@@ -47,6 +47,7 @@ Optional Endpoint Properties:
   If none of hsync-active, vsync-active and pclk-sample is specified the
   endpoint will use embedded BT.656 synchronization.
 
+  - default-input: Select which input is selected after reset.
 
 Example:
 

@@ -60,6 +61,8 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		default-input = <0>;
+
 		port@0 {
 			reg = <0>;
 		};

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 16646517..5b6ac8e 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c

@@ -2745,6 +2745,7 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
 	struct device_node *endpoint;
 	struct device_node *np;
 	unsigned int flags;
+	u32 v;
 
 	np = state->i2c_clients[ADV76XX_PAGE_IO]->dev.of_node;
 

@@ -2754,6 +2755,12 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
 		return -EINVAL;
 
 	v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+
+	if (!of_property_read_u32(endpoint, "default-input", &v))
+		state->pdata.default_input = v;
+	else
+		state->pdata.default_input = -1;
+
 	of_node_put(endpoint);
 
 	flags = bus_cfg.bus.parallel.flags;

@@ -2792,7 +2799,6 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
 	/* Hardcode the remaining platform data fields. */
 	state->pdata.disable_pwrdnb = 0;
 	state->pdata.disable_cable_det_rst = 0;
-	state->pdata.default_input = -1;
 	state->pdata.blank_data = 1;
 	state->pdata.alt_data_sat = 1;
 	state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0;