@@ -469,6 +469,106 @@ If a page is file-backed and dirty, it will be written back to the backing
 storage.
 The advice might be ignored for some pages in the range when it is not
 applicable.
+.TP
+.BR MADV_POPULATE_READ " (since Linux 5.14)"
+"Populate (prefault) page tables readable,
+faulting in all pages in the range just as if manually reading from each page;
+however,
+avoid the actual memory access that would have been performed after handling
+the fault.
+.IP
+In contrast to
+.BR MAP_POPULATE ,
+.B MADV_POPULATE_READ
+does not hide errors,
+can be applied to (parts of) existing mappings and will always populate
+(prefault) page tables readable.
+One example use case is prefaulting a file mapping,
+reading all file content from disk;
+however,
+pages won't be dirtied and consequently won't have to be written back to disk
+when evicting the pages from memory.
+.IP
+Depending on the underlying mapping,
+map the shared zeropage,
+preallocate memory or read the underlying file;
+files with holes might or might not preallocate blocks.
+If populating fails,
+a
+.B SIGBUS
+signal is not generated; instead, an error is returned.
+.IP
+If
+.B MADV_POPULATE_READ
+succeeds,
+all page tables have been populated (prefaulted) readable once.
+If
+.B MADV_POPULATE_READ
+fails,
+some page tables might have been populated.
+.IP
+.B MADV_POPULATE_READ
+cannot be applied to mappings without read permissions
+and special mappings,
+for example,
+mappings marked with kernel-internal flags such as
+.B VM_PFNMAP
+or
+.BR VM_IO ,
+or secret memory regions created using
+.BR memfd_secret(2) .
+.IP
+Note that with
+.BR MADV_POPULATE_READ ,
+the process can be killed at any moment when the system runs out of memory.
+.TP
+.BR MADV_POPULATE_WRITE " (since Linux 5.14)"
+Populate (prefault) page tables writable,
+faulting in all pages in the range just as if manually writing to each
+each page;
+however,
+avoid the actual memory access that would have been performed after handling
+the fault.
+.IP
+In contrast to
+.BR MAP_POPULATE ,
+MADV_POPULATE_WRITE does not hide errors,
+can be applied to (parts of) existing mappings and will always populate
+(prefault) page tables writable.
+One example use case is preallocating memory,
+breaking any CoW (Copy on Write).
+.IP
+Depending on the underlying mapping,
+preallocate memory or read the underlying file;
+files with holes will preallocate blocks.
+If populating fails,
+a
+.B SIGBUS
+signal is not generated; instead, an error is returned.
+.IP
+If
+.B MADV_POPULATE_WRITE
+succeeds,
+all page tables have been populated (prefaulted) writable once.
+If
+.B MADV_POPULATE_WRITE
+fails,
+some page tables might have been populated.
+.IP
+.B MADV_POPULATE_WRITE
+cannot be applied to mappings without write permissions
+and special mappings,
+for example,
+mappings marked with kernel-internal flags such as
+.B VM_PFNMAP
+or
+.BR VM_IO ,
+or secret memory regions created using
+.BR memfd_secret(2) .
+.IP
+Note that with
+.BR MADV_POPULATE_WRITE ,
+the process can be killed at any moment when the system runs out of memory.
 .SH RETURN VALUE
 On success,
 .BR madvise ()

@@ -490,6 +590,22 @@ A kernel resource was temporarily unavailable.
 .B EBADF
 The map exists, but the area maps something that isn't a file.
 .TP
+.B EFAULT
+.I advice
+is
+.B MADV_POPULATE_READ
+or
+.BR MADV_POPULATE_WRITE ,
+and populating (prefaulting) page tables failed because a
+.B SIGBUS
+would have been generated on actual memory access and the reason is not a
+HW poisoned page
+(HW poisoned pages can,
+for example,
+be created using the
+.B MADV_HWPOISON
+flag described elsewhere in this page).
+.TP
 .B EINVAL
 .I addr
 is not page-aligned or

@@ -533,6 +649,22 @@ or
 .BR VM_PFNMAP
 ranges.
 .TP
+.B EINVAL
+.I advice
+is
+.B MADV_POPULATE_READ
+or
+.BR MADV_POPULATE_WRITE ,
+but the specified address range includes ranges with insufficient permissions
+or special mappings,
+for example,
+mappings marked with kernel-internal flags such a
+.B VM_IO
+or
+.BR VM_PFNMAP ,
+or secret memory regions created using
+.BR memfd_secret(2) .
+.TP
 .B EIO
 (for
 .BR MADV_WILLNEED )

@@ -548,6 +680,15 @@ Not enough memory: paging in failed.
 Addresses in the specified range are not currently
 mapped, or are outside the address space of the process.
 .TP
+.B ENOMEM
+.I advice
+is
+.B MADV_POPULATE_READ
+or
+.BR MADV_POPULATE_WRITE ,
+and populating (prefaulting) page tables failed because there was not enough
+memory.
+.TP
 .B EPERM
 .I advice
 is

@@ -555,6 +696,20 @@ is
 but the caller does not have the
 .B CAP_SYS_ADMIN
 capability.
+.TP
+.B EHWPOISON
+.I advice
+is
+.B MADV_POPULATE_READ
+or
+.BR MADV_POPULATE_WRITE ,
+and populating (prefaulting) page tables failed because a HW poisoned page
+(HW poisoned pages can,
+for example,
+be created using the
+.B MADV_HWPOISON
+flag described elsewhere in this page)
+was encountered.
 .SH VERSIONS
 Since Linux 3.18,
 .\" commit d3ac21cacc24790eb45d735769f35753f5b56ceb

@@ -602,6 +757,7 @@ from the system call, as it should).
 .\" function first appeared in 4.4BSD.
 .SH SEE ALSO
 .BR getrlimit (2),
+.BR memfd_secret(2),
 .BR mincore (2),
 .BR mmap (2),
 .BR mprotect (2),