[PATCH 3/3] dt-bindings:leds:Extend panic led state
From: <hidden>
Date: 2021-09-06 13:55:08
Also in:
linux-devicetree, lkml
Subsystem:
led subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: chao zeng <redacted> Add extra "panic-indicator-on" and "panic-indicator-off" to extend the panic led status.Not only blink to indicate the panic Signed-off-by: chao zeng <redacted> --- Documentation/devicetree/bindings/leds/common.yaml | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 697102707703..7eb367063155 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml@@ -125,7 +125,19 @@ properties: panic-indicator: description: This property specifies that the LED should be used, if at all possible, - as a panic indicator. + using blink as a panic indicator. + type: boolean + + panic-indicator-on: + description: + This property specifies that the LED should be used, if at all possible, + using led on as a panic indicator. + type: boolean + + panic-indicator-off: + description: + This property specifies that the LED should be used, if at all possible, + using led off as a panic indicator. type: boolean retain-state-shutdown:
--
2.17.1