Re: [PATCH 11/13] leds: max77650: add LEDs support
From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Date: 2019-01-20 16:39:38
Also in:
linux-devicetree, linux-gpio, linux-input, linux-pm, lkml
Hi Bartosz, Thank you for the patch. I have few minor issues below. On 1/18/19 2:42 PM, Bartosz Golaszewski wrote:
quoted hunk ↗ jump to hunk
From: Bartosz Golaszewski <redacted> This adds basic support for LEDs for the max77650 PMIC. The device has three current sinks for driving LEDs. Signed-off-by: Bartosz Golaszewski <redacted> --- drivers/leds/Kconfig | 6 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-max77650.c | 162 +++++++++++++++++++++++++++++++++++ 3 files changed, 169 insertions(+) create mode 100644 drivers/leds/leds-max77650.cdiff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index a72f97fca57b..6e7a8f51eccc 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig@@ -608,6 +608,12 @@ config LEDS_TLC591XX This option enables support for Texas Instruments TLC59108 and TLC59116 LED controllers. +config LEDS_MAX77650 + tristate "LED support for Maxim MAX77650 PMIC" + depends on MFD_MAX77650 + help + LEDs driver for MAX77650 family of PMICs from Maxim Integrated." + config LEDS_MAX77693 tristate "LED support for MAX77693 Flash" depends on LEDS_CLASS_FLASHdiff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 4c1b0054f379..f48b2404dbb7 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile@@ -61,6 +61,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o obj-$(CONFIG_LEDS_NS2) += leds-ns2.o obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o +obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.odiff --git a/drivers/leds/leds-max77650.c b/drivers/leds/leds-max77650.c new file mode 100644 index 000000000000..be2bb1c60448 --- /dev/null +++ b/drivers/leds/leds-max77650.c@@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 BayLibre SAS + * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> + * + * LEDS driver for MAXIM 77650/77651 charger/power-supply. + */
Please use uniform C++ comment style. If in doubt, please refer to the following Linus statement from [0]: "And yes, feel free to replace block comments with // while at it."
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_NUM_LEDS 3
+
+#define MAX77650_LED_A_BASE 0x40
+#define MAX77650_LED_B_BASE 0x43
+
+#define MAX77650_LED_BR_MASK GENMASK(4, 0)
+#define MAX77650_LED_EN_MASK GENMASK(7, 6)
+
+/* Enable EN_LED_MSTR. */
+#define MAX77650_LED_TOP_DEFAULT BIT(0)
+
+#define MAX77650_LED_ENABLE GENMASK(7, 6)
+#define MAX77650_LED_DISABLE 0x00
+
+#define MAX77650_LED_A_DEFAULT MAX77650_LED_DISABLE
+/* 100% on duty */
+#define MAX77650_LED_B_DEFAULT GENMASK(3, 0)
+
+struct max77650_leds;
+
+struct max77650_led {
+ struct led_classdev cdev;
+ struct max77650_leds *parent;
+ unsigned int regA;
+ unsigned int regB;
+};
+
+struct max77650_leds {
+ struct regmap *map;
+ struct max77650_led leds[MAX77650_NUM_LEDS];
+};
+
+static struct max77650_led *max77650_to_led(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct max77650_led, cdev);
+}
+
+static int max77650_leds_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)I would change function names to max77650_led* (singular). It would be consistent with most of the other LED class drivers. LED driver for max77693 flash cell also uses this scheme (drivers/leds/leds-max77693.c).
+{
+ struct max77650_led *led = max77650_to_led(cdev);
+ struct regmap *regmap = led->parent->map;
+ int val, mask;
+
+ mask = MAX77650_LED_BR_MASK | MAX77650_LED_EN_MASK;
+
+ if (brightness == LED_OFF) {
+ val = MAX77650_LED_DISABLE;
+ } else {
+ val = MAX77650_LED_ENABLE;
+ /*
+ * We can set the brightness with 5-bit resolution.
+ *
+ * For brightness == 1, the bits we're writing will be 0, but
+ * since we keep LED_FS0 set to 12.8mA full-scale range, the
+ * LED will be lit slightly.
+ */
+ val |= brightness / 8;
+ }
+
+ return regmap_update_bits(regmap, led->regA, mask, val);
+}
+
+static int max77650_leds_probe(struct platform_device *pdev)
+{
+ struct device_node *of_node, *child;
+ struct max77650_leds *leds;
+ struct max77650_led *led;
+ struct device *parent;
+ struct device *dev;
+ int rv, num_leds;
+ u32 reg;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+ of_node = dev->of_node;
+
+ if (!of_node)
+ return -ENODEV;
+
+ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ leds->map = dev_get_regmap(dev->parent, NULL);
+ if (!leds->map)
+ return -ENODEV;
+
+ num_leds = of_get_child_count(of_node);
+ if (!num_leds || num_leds > MAX77650_NUM_LEDS)
+ return -ENODEV;
+
+ for_each_child_of_node(of_node, child) {
+ rv = of_property_read_u32(child, "reg", ®);
+ if (rv || reg >= MAX77650_NUM_LEDS)
+ return -EINVAL;
+
+ led = &leds->leds[reg];
+
+ led->parent = leds;
+ led->regA = MAX77650_LED_A_BASE + reg;
+ led->regB = MAX77650_LED_B_BASE + reg;
+ led->cdev.brightness_set_blocking
+ = max77650_leds_brightness_set;
+
+ led->cdev.name = of_get_property(child, "label", NULL);
+ if (!led->cdev.name)
+ led->cdev.name = child->name;Please follow how other recent LED class drivers construct LED names, e.g. drivers/leds/leds-cr0014114.c. We are in the course of creating generic support for creating LED names, but until it is agreed upon we've got to use other drivers as a reference.
+ + of_property_read_string(child, "linux,default-trigger", + &led->cdev.default_trigger); + + rv = devm_of_led_classdev_register(dev, child, &led->cdev); + if (rv) + return rv; + + rv = regmap_write(leds->map, led->regA, + MAX77650_LED_A_DEFAULT); + if (rv) + return rv; + + rv = regmap_write(leds->map, led->regB, + MAX77650_LED_B_DEFAULT); + if (rv) + return rv; + } + + rv = regmap_write(leds->map, + MAX77650_REG_CNFG_LED_TOP, + MAX77650_LED_TOP_DEFAULT); + if (rv) + return rv;
No need to check rv here: return regmap_write(leds->map, MAX77650_REG_CNFG_LED_TOP, MAX77650_LED_TOP_DEFAULT)
+ return 0;
+}
+
+static struct platform_driver max77650_leds_driver = {
+ .driver = {
+ .name = "max77650-leds",s/leds/led/
+ },
+ .probe = max77650_leds_probe,
+};
+module_platform_driver(max77650_leds_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 LED driver");
+MODULE_AUTHOR("Bartosz Golaszewski [off-list ref]");
+MODULE_LICENSE("GPL");s/GPL/GPL v2/ [0] https://lkml.org/lkml/2017/11/2/715 -- Best regards, Jacek Anaszewski