On Thu, 26 Nov 2015, Milo Kim wrote:

LM3633 and LM3697 are TI LMU MFD device.
Those devices have hardware monitoring feature which detects open or
short circuit case.

Debugfs
-------
  Two files are created.
    open_fault:  check light output channel is open or not.
    short_fault: check light output channel is shorted or not.

  The driver checks the status of backlight output channels.
  LM3633 and LM3697 have same sequence to check channels, so common
  functions are used.
  ABI/testing document is also included.

Operations
----------
  Two devices have common control flow but register addresses are different.
  The structure, 'ti_lmu_reg' is used for register configuration.

Event notifier
--------------
  After fault monitoring is done, LMU device is reset. So backlight and
  LED device should be reinitialized. It notifies an event as soon as
  the monitoring is done. Then, LM3633 and LM3697 backlight and LED drivers
  handle this event.

Cc: Lee Jones <redacted> 
Cc: Jacek Anaszewski <redacted>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-leds@vger.kernel.org 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <redacted>
---
 .../ABI/testing/debugfs-ti-lmu-fault-monitor       |  32 ++
 drivers/mfd/Kconfig                                |  10 +
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/ti-lmu-fault-monitor.c                 | 405 +++++++++++++++++++++

I think this device is part of the MFD, rather than an MFD itself.
Please relocate it to somewhere more appropriate.

 4 files changed, 448 insertions(+)
 create mode 100644 Documentation/ABI/testing/debugfs-ti-lmu-fault-monitor
 create mode 100644 drivers/mfd/ti-lmu-fault-monitor.c

[...]

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog