[PATCH v2 24/24] PCI: xgene: Use PCI_ERROR_RESPONSE to specify hardware error
From: Naveen Naidu <hidden>
Date: 2021-10-15 14:47:44
Also in:
linux-arm-kernel, linux-pci, lkml
Subsystem:
pci driver for appliedmicro xgene, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Toan Le, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Include PCI_ERROR_RESPONSE along with 0xffffffff in the comment to specify a hardware error. This makes finding where MMIO read error occurs easier. Signed-off-by: Naveen Naidu <redacted> --- drivers/pci/controller/pci-xgene.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c
index e64536047b65..4b10794e1ba1 100644
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c@@ -176,10 +176,10 @@ static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn, * Retry Status (CRS) logic: when CRS Software Visibility is * enabled and we read the Vendor and Device ID of a non-existent * device, the controller fabricates return data of 0xFFFF0001 - * ("device exists but is not ready") instead of 0xFFFFFFFF - * ("device does not exist"). This causes the PCI core to retry - * the read until it times out. Avoid this by not claiming to - * support CRS SV. + * ("device exists but is not ready") instead of + * 0xFFFFFFFF (PCI_ERROR_RESPONSE) ("device does not exist"). This causes + * the PCI core to retry the read until it times out. + * Avoid this by not claiming to support CRS SV. */ if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) && ((where & ~0x3) == XGENE_V1_PCI_EXP_CAP + PCI_EXP_RTCTL))
--
2.25.1
_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees