Thread (2 messages) 2 messages, 2 authors, 2022-07-05

Re: [PATCH 6/6] i2c: Make remove callback return void

From: Jean Delvare <hidden>
Date: 2022-07-05 10:09:00
Also in: alsa-devel, chrome-platform, dri-devel, linux-arm-kernel, linux-clk, linux-crypto, linux-devicetree, linux-fbdev, linux-gpio, linux-hwmon, linux-i2c, linux-iio, linux-input, linux-leds, linux-media, linux-mediatek, linux-omap, linux-pm, linux-pwm, linux-rtc, linux-serial, linux-staging, linux-usb, linux-watchdog, linuxppc-dev, netdev, platform-driver-x86

Possibly related (same subject, not in this thread)

On Tue, 28 Jun 2022 16:03:12 +0200, Uwe Kleine-König wrote:
From: Uwe Kleine-König <redacted>

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <redacted>
---
That's a huge change for a relatively small benefit, but if this is
approved by the I2C core maintainer then fine with me. For:
 drivers/hwmon/adc128d818.c                                | 4 +---
 drivers/hwmon/adt7470.c                                   | 3 +--
 drivers/hwmon/asb100.c                                    | 6 ++----
 drivers/hwmon/asc7621.c                                   | 4 +---
 drivers/hwmon/dme1737.c                                   | 4 +---
 drivers/hwmon/f75375s.c                                   | 5 ++---
 drivers/hwmon/fschmd.c                                    | 6 ++----
 drivers/hwmon/ftsteutates.c                               | 3 +--
 drivers/hwmon/ina209.c                                    | 4 +---
 drivers/hwmon/ina3221.c                                   | 4 +---
 drivers/hwmon/jc42.c                                      | 3 +--
 drivers/hwmon/mcp3021.c                                   | 4 +---
 drivers/hwmon/occ/p8_i2c.c                                | 4 +---
 drivers/hwmon/pcf8591.c                                   | 3 +--
 drivers/hwmon/smm665.c                                    | 3 +--
 drivers/hwmon/tps23861.c                                  | 4 +---
 drivers/hwmon/w83781d.c                                   | 4 +---
 drivers/hwmon/w83791d.c                                   | 6 ++----
 drivers/hwmon/w83792d.c                                   | 6 ++----
 drivers/hwmon/w83793.c                                    | 6 ++----
 drivers/hwmon/w83795.c                                    | 4 +---
 drivers/hwmon/w83l785ts.c                                 | 6 ++----
 drivers/i2c/i2c-core-base.c                               | 6 +-----
 drivers/i2c/i2c-slave-eeprom.c                            | 4 +---
 drivers/i2c/i2c-slave-testunit.c                          | 3 +--
 drivers/i2c/i2c-smbus.c                                   | 3 +--
 drivers/i2c/muxes/i2c-mux-ltc4306.c                       | 4 +---
 drivers/i2c/muxes/i2c-mux-pca9541.c                       | 3 +--
 drivers/i2c/muxes/i2c-mux-pca954x.c                       | 3 +--
Reviewed-by: Jean Delvare <redacted>

-- 
Jean Delvare
SUSE L3 Support
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help