[PATCH v2 3/3] arm64: dts: qcom: milos-fairphone-fp6: Add touchscreen
flat view
COLD26d
REVIEWED: 1 (0M)
From: Luca Weiss <hidden>
Date: 2026-09-17 08:25:33
Also in:
linux-arm-msm, linux-devicetree, lkml, phone-devel
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
1 review trailer.
Add a node for the ESWIN EPH8621 touchscreen connected via SPI and the pinctrl state for the two GPIOs connected to the touchscreen. Reviewed-by: Konrad Dybcio <redacted> Signed-off-by: Luca Weiss <redacted> --- arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 29 +++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
index 4b7ae87270ac..498fde3d3d18 100644
--- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
+++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts@@ -983,7 +983,27 @@ &sdhc_2 { }; &spi0 { - /* Eswin EPH8621 touchscreen @ 0 */ + status = "okay"; + + touchscreen@0 { + compatible = "eswin,eph8621"; + reg = <0>; + + avdd-supply = <&vreg_l22b>; + vddio-supply = <&vreg_l9b>; + + interrupts-extended = <&tlmm 19 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + spi-max-frequency = <2000000>; + + touchscreen-size-x = <1116>; + touchscreen-size-y = <2484>; + touchscreen-inverted-x; + }; }; &tlmm {
@@ -991,6 +1011,13 @@ &tlmm { <13 1>, /* NC */ <63 2>; /* WLAN UART */ + touchscreen_default: touchscreen-default-state { + pins = "gpio19", "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_card_det_n: sdc2-card-det-state { pins = "gpio65"; function = "gpio";
--
2.55.0