Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] Removal of Kconfig options that serve as the only user-visible prompts to select hidden configuration symbols.
- [High] Removal of Kconfig options that only appeared 'unused' due to preexisting copy-paste typos in Makefiles or C code.
- [Low] Dangling comment in `drivers/leds/Kconfig` referencing the removed `HID_THINGM` option.
--
commit 7e7aea7e95bed23309216588f06ea0dc933d0354
Author: Breno Rodrigues Alves [off-list ref]
Kconfig: purge twenty-eight legacy ghost options (v2)
This commit removes 28 Kconfig options that were identified as legacy ghost
options lacking explicit C code or Makefile references.
quoted hunk ↗ jump to hunk
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
[ ... ]
quoted hunk ↗ jump to hunk
@@ -1296,15 +1296,6 @@ config HID_TOPRE
Say Y for N-key rollover support on Topre REALFORCE R2 108/87 key and
Topre REALFORCE R3S 87 key keyboards.
-config HID_THINGM
- tristate "ThingM blink(1) USB RGB LED"
- depends on LEDS_CLASS
- select HID_LED
- help
- Support for the ThingM blink(1) USB RGB LED. This driver has been
- merged into the generic hid led driver. Config symbol HID_THINGM
- just selects HID_LED and will be removed soon.
-
[Severity: Low]
Does removing this option leave a dangling reference in the tree?
There is a comment in drivers/leds/Kconfig that explicitly references this
removed option:
comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
quoted hunk ↗ jump to hunk
diff --git a/drivers/interconnect/mediatek/Kconfig b/drivers/interconnect/mediatek/Kconfig
--- a/drivers/interconnect/mediatek/Kconfig
+++ b/drivers/interconnect/mediatek/Kconfig
[ ... ]
quoted hunk ↗ jump to hunk
@@ -28,9 +28,3 @@ config INTERCONNECT_MTK_MT8195
This is a driver for the MediaTek bus interconnect on MT8195-based
platforms.
-config INTERCONNECT_MTK_MT8196
- tristate "MediaTek MT8196 interconnect driver"
- depends on INTERCONNECT_MTK_DVFSRC_EMI
- help
- This is a driver for the MediaTek bus interconnect on MT8196-based
- platforms.
[Severity: High]
Does removing this option mask an underlying typo in the Makefile rather than
removing true dead weight?
Looking at drivers/interconnect/mediatek/Makefile, mt8196.o is mapped to
CONFIG_INTERCONNECT_MTK_MT8195 instead of CONFIG_INTERCONNECT_MTK_MT8196:
obj-$(CONFIG_INTERCONNECT_MTK_MT8195) += mt8196.o
If we remove the Kconfig option entirely, we lose the ability to fix the root
typo and compile this driver.
quoted hunk ↗ jump to hunk
diff --git a/drivers/media/dvb-core/Kconfig b/drivers/media/dvb-core/Kconfig
--- a/drivers/media/dvb-core/Kconfig
+++ b/drivers/media/dvb-core/Kconfig
[ ... ]
quoted hunk ↗ jump to hunk
@@ -67,14 +67,3 @@ config DVB_DEMUX_SECTION_LOSS_LOG
If you are unsure about this, say N here.
-config DVB_ULE_DEBUG
- bool "Enable DVB net ULE packet debug messages"
- depends on DVB_CORE
- help
- Enable extra log messages meant to detect problems while
- handling DVB network ULE packet loss inside the Kernel.
-
- Should not be enabled on normal cases, as logs can
- be very verbose.
-
- If you are unsure about this, say N here.
[Severity: High]
Does removing this option permanently break the debug feature due to an
existing typo in the C code?
In drivers/media/dvb-core/dvb_net.c, the code checks for the macro without
the CONFIG_ prefix:
#ifdef DVB_ULE_DEBUG
Removing this Kconfig option eliminates the intended way to fix the typo and
enable these debug logs.
quoted hunk ↗ jump to hunk
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
[ ... ]
quoted hunk ↗ jump to hunk
@@ -121,20 +121,6 @@ config PCI_IMX6_HOST
on DesignWare hardware and therefore the driver re-uses the
DesignWare core functions to implement the driver.
-config PCI_IMX6_EP
- bool "Freescale i.MX6/7/8 PCIe controller (endpoint mode)"
- depends on ARCH_MXC || COMPILE_TEST
- depends on PCI_ENDPOINT
- select PCIE_DW_EP
- select PCI_HOST_COMMON
- select PCI_IMX6
- select PCI_PWRCTRL_GENERIC
- help
- Enables support for the PCIe controller in the i.MX SoCs to
- work in endpoint mode. The PCI controller on i.MX is based
- on DesignWare hardware and therefore the driver re-uses the
- DesignWare core functions to implement the driver.
-
[Severity: High]
Does removing this option silently disable hardware support by removing the
only prompt that selects the hidden PCIE_DW_EP symbol?
Without PCI_IMX6_EP to select PCIE_DW_EP, the endpoint initialization
function imx_add_pcie_ep() in drivers/pci/controller/dwc/pci-imx6.c will
end up calling dw_pcie_ep_init().
When PCIE_DW_EP is not selected, dw_pcie_ep_init() resolves to a stub that
returns 0, leaving ep->epc uninitialized and the endpoint silently broken.
quoted hunk ↗ jump to hunk
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
[ ... ]
quoted hunk ↗ jump to hunk
@@ -900,16 +899,6 @@ config REGULATOR_MT6315
This driver supports the control of different power rails of device
through regulator interface.
-config REGULATOR_MT6316
- tristate "MT6316 SPMI PMIC regulator driver"
- depends on SPMI
- select REGMAP_SPMI
- help
- Say Y here to enable support for 2+2, 3+1 and 4 phase regulators
- found in the MediaTek MT6316 BP, CP, DP, HP, VP and TP SPMI PMICs.
- This driver supports the control of different power rails of device
- through regulator interface.
-
[Severity: High]
Does removing this option mask an underlying typo in the Makefile rather than
removing true dead weight?
Looking at drivers/regulator/Makefile, mt6316-regulator.o is mistakenly
mapped to CONFIG_REGULATOR_MT6315:
obj-$(CONFIG_REGULATOR_MT6315) += mt6316-regulator.o
Removing the Kconfig option destroys the intended path to fix the root typo
and compile the MT6316 PMIC regulator driver.
quoted hunk ↗ jump to hunk
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
[ ... ]
quoted hunk ↗ jump to hunk
@@ -192,15 +192,6 @@ config SND_SOC_TEGRA_AUDIO_GRAPH_CARD
config SND_SOC_TEGRA_MACHINE_DRV
tristate
-config SND_SOC_TEGRA_RT5631
- tristate "SoC Audio support for Tegra boards using an RT5631 codec"
- depends on SND_SOC_TEGRA && I2C && GPIOLIB
- select SND_SOC_TEGRA_MACHINE_DRV
- select SND_SOC_RT5631
- help
- Say Y or M here if you want to add support for SoC audio on Tegra
- boards using the RT5631 codec, such as Transformer.
-
[Severity: High]
Will users still be able to enable the Tegra audio machine driver without this
prompt?
This option appears to be the necessary user-visible prompt to select the
hidden configuration symbol SND_SOC_TEGRA_MACHINE_DRV for this specific
hardware.
[ ... ]
quoted hunk ↗ jump to hunk
@@ -276,24 +267,6 @@ config SND_SOC_TEGRA_MAX98090
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the MAX98090 codec, such as Venice2.
-config SND_SOC_TEGRA_MAX98088
- tristate "SoC Audio support for Tegra boards using a MAX9808x codec"
- depends on I2C && GPIOLIB
- select SND_SOC_TEGRA_MACHINE_DRV
- select SND_SOC_MAX98088
- help
- Say Y or M here if you want to add support for SoC audio on Tegra
- boards using the MAX98088 codec, such as LG X3.
-
[Severity: High]
Similar to the RT5631 codec above, does removing this option prevent the
user from enabling the hidden SND_SOC_TEGRA_MACHINE_DRV symbol needed for
MAX9808x support?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260904232904.87530-1-breno3011alves@gmail.com?part=1