Re: [PATCH v2 3/5] dt-bindings: touchscreen: convert raspberrypi,firmware-ts bindings to json schema
From: "Rob Herring (Arm)" <robh@kernel.org>
Date: 2025-09-14 14:24:27
Also in:
linux-arm-kernel, linux-devicetree, lkml
On Sat, 13 Sep 2025 11:26:53 +0200, Dario Binacchi wrote:
Convert Raspberry Pi firmware 7" touchscreen controller device tree binding to json-schema. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- Changes in v2: - Added in v2 .../touchscreen/raspberrypi,firmware-ts.txt | 26 ----------- .../touchscreen/raspberrypi,firmware-ts.yaml | 45 +++++++++++++++++++ 2 files changed, 45 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt create mode 100644 Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.yaml
My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.example.dtb: firmware-rpi (raspberrypi,bcm2835-firmware): 'touchscreen' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.example.dtb: firmware-rpi (raspberrypi,bcm2835-firmware): compatible: ['raspberrypi,bcm2835-firmware'] is too short from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250913092707.1005616-3-dario.binacchi@amarulasolutions.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.