[PATCH v9 06/11] gpio: regmap: Allow to allocate regmap-irq device
From: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Date: 2025-05-22 12:06:50
Also in:
linux-devicetree, linux-gpio, linux-pwm, lkml
Subsystem:
gpio regmap, gpio subsystem, the rest · Maintainers:
Michael Walle, Linus Walleij, Bartosz Golaszewski, Linus Torvalds
GPIO controller often have support for IRQ: allow to easily allocate both gpio-regmap and regmap-irq in one operation. Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com> --- drivers/gpio/gpio-regmap.c | 21 +++++++++++++++++++-- include/linux/gpio/regmap.h | 11 +++++++++++ 2 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 87c4225784cf..9cbbbaf82609 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c@@ -215,6 +215,7 @@ EXPORT_SYMBOL_GPL(gpio_regmap_get_drvdata); */ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config) { + struct irq_domain *irq_domain; struct gpio_regmap *gpio; struct gpio_chip *chip; int ret;
@@ -295,8 +296,24 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config if (ret < 0) goto err_free_gpio; - if (config->irq_domain) { - ret = gpiochip_irqchip_add_domain(chip, config->irq_domain); +#ifdef CONFIG_REGMAP_IRQ + if (config->regmap_irq_chip) { + struct regmap_irq_chip_data *irq_chip_data; + + ret = devm_regmap_add_irq_chip_fwnode(config->parent, dev_fwnode(config->parent), + config->regmap, config->regmap_irq_line, + config->regmap_irq_flags, 0, + config->regmap_irq_chip, &irq_chip_data); + if (ret) + goto err_free_gpio; + + irq_domain = regmap_irq_get_domain(irq_chip_data); + } else +#endif + irq_domain = config->irq_domain; + + if (irq_domain) { + ret = gpiochip_irqchip_add_domain(chip, irq_domain); if (ret) goto err_remove_gpiochip; }
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index c722c67668c6..19b52ac03a5d 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h@@ -40,6 +40,11 @@ struct regmap; * @drvdata: (Optional) Pointer to driver specific data which is * not used by gpio-remap but is provided "as is" to the * driver callback(s). + * @regmap_irq_chip: (Optional) Pointer on an regmap_irq_chip structure. If + * set, a regmap-irq device will be created and the IRQ + * domain will be set accordingly. + * @regmap_irq_line (Optional) The IRQ the device uses to signal interrupts. + * @regmap_irq_flags (Optional) The IRQF_ flags to use for the interrupt. * * The ->reg_mask_xlate translates a given base address and GPIO offset to * register and mask pair. The base address is one of the given register
@@ -78,6 +83,12 @@ struct gpio_regmap_config { int ngpio_per_reg; struct irq_domain *irq_domain; +#ifdef CONFIG_REGMAP_IRQ + struct regmap_irq_chip *regmap_irq_chip; + int regmap_irq_line; + unsigned long regmap_irq_flags; +#endif + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, unsigned int offset, unsigned int *reg, unsigned int *mask);
--
2.39.5