[PATCH RFC 1/4] dt-bindings: input: melfas-mip4: document linux,keycodes property
From: Kaustabh Chakraborty <hidden>
Date: 2025-05-03 09:08:51
Also in:
linux-devicetree, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document the linux,keycodes property. The property values are key codes which are used in input key events generated by the touchkey device. Signed-off-by: Kaustabh Chakraborty <redacted> --- Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
index b2ab5498e51900e887fab4d9b5239cccccec2ea9..16d1031ee017604ac56109dfbebfce6a05491c60 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt@@ -7,6 +7,7 @@ Required properties: Optional properties: - ce-gpios: GPIO connected to the CE (chip enable) pin of the chip +- linux,keycodes: array of keycodes to be reported by touchkeys Example: i2c@00000000 {
@@ -16,5 +17,6 @@ Example: interrupt-parent = <&gpio>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; }; };
--
2.49.0