On 8/19/24 8:05 PM, Frank Li wrote:

[...]

+  ti,keep-vref-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      set to keep Vref on for differential measurements as well.

Please start sentence with uppercase letter.

+  ti,pendown-gpio-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Platform specific debounce time for the pendown-gpio.
+
+  ti,penirq-recheck-delay-usecs:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      If set to non-zero, after samples are taken this delay is applied and
+      penirq is rechecked, to help avoid false events.  This value is
+      affected by the material used to build the touch layer.
+
+  ti,pressure-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Maximum reported pressure value.
+
+  ti,pressure-min:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Minimum reported pressure value (threshold).
+
+  ti,settle-delay-usec:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Settling time of the analog signals; a function of Vcc and the
+      capacitance on the X/Y drivers.  If set to non-zero, two samples are
+      taken with settle_delay us apart, and the second one is used. ~150
+      uSec with 0.01uF caps.
+
+  ti,swap-xy:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      swap x and y axis.

DTTO

With those two fixed:

Reviewed-by: Marek Vasut <marex@denx.de>

Thanks !