[PATCH v4 36/38] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
flat view
STALE1139d
REVIEWED: 1 (0M)
From: Dmitry Baryshkov <hidden>
Date: 2023-08-27 01:01:21
Also in:
linux-arm-msm, linux-devicetree, linux-iio, linux-leds
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Revision v4 of 3 in this series; 1 review trailer.
Revisions (3)
- v4 current
- v5 [diff vs current]
- v6 [diff vs current]
Use generic `adc-channel@N' node names for board-specific ADC channels (routed to MPP pins) to follow the schema. Reviewed-by: Konrad Dybcio <redacted> Signed-off-by: Dmitry Baryshkov <redacted> --- .../arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 8b70d4a59c7b..bf2527941917 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts@@ -998,23 +998,27 @@ &pm8058_xoadc { xoadc-ref-supply = <&pm8058_l18>; /* Board-specific channels */ - mpp5@5 { + adc-channel@5 { /* Connected to AOUT of ALS sensor */ reg = <0x00 0x05>; }; - mpp6@6 { + + adc-channel@6 { /* Connected to test point TP43 */ reg = <0x00 0x06>; }; - mpp7@7 { + + adc-channel@7 { /* Connected to battery thermistor */ reg = <0x00 0x07>; }; - mpp8@8 { + + adc-channel@8 { /* Connected to battery ID detector */ reg = <0x00 0x08>; }; - mpp9@9 { + + adc-channel@9 { /* Connected to XO thermistor */ reg = <0x00 0x09>; };
--
2.39.2