Hi,Krzysztof,
Thanks for Krzysztof.Sorry, I didn't run `make dt_binding_check. I
will check before sending V2 patch.
On Fri, Jun 2, 2023 at 10:19 PM Krzysztof Kozlowski
[off-list ref] wrote:
On 02/06/2023 16:09, Cong Yang wrote:
quoted
Add an ilitek touch screen chip ili9882t.
Signed-off-by: Cong Yang <redacted>
It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.
There is no way this would work and if you test you will see error msg.
Feel free to ping if message is unclear.
quoted
---
.../bindings/input/elan,ekth6915.yaml | 36 ++++++++++++++-----
1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
index 05e6f2df604c..73e94cb6c4e0 100644
--- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -15,11 +15,15 @@ description:
properties:
compatible:
- items:
- - const: elan,ekth6915
+ oneOf:
It's not oneOf. Just enum
Done,thanks.
quoted
+ - enum:
+ - elan,ekth6915
+ - ilitek,ili9882t
reg:
- const: 0x10
+ enum:
+ - 0x10
+ - 0x41
interrupts:
maxItems: 1@@ -29,17 +33,31 @@ properties:
vcc33-supply:
description: The 3.3V supply to the touchscreen.
+ If using ili9882t then this supply will not be needed.
Are you sure these are compatible devices then? What does it mean "not
needed"? Is the pin there or is not?
Yes,ili9882t this touch ic not needed 3.3V supply,this pin does not exist.
quoted
vccio-supply:
description:
The IO supply to the touchscreen. Need not be specified if this is the
same as the 3.3V supply.
-
-required:
- - compatible
- - reg
- - interrupts
- - vcc33-supply
+ If using ili9882t, the IO supply is required.
+
+ required:
NAK. Really. Test patches before sending.
Best regards,
Krzysztof