Re: [PATCH 5/5] ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator
From: Konrad Dybcio <hidden>
Date: 2023-05-02 10:24:02
Also in:
linux-arm-msm, linux-devicetree, lkml, phone-devel
On 30.04.2023 20:20, Luca Weiss wrote:
The watch has a DRV2605 for haptics. Add a node for it based on the values found in the downstream board file. Signed-off-by: Luca Weiss <redacted> ---
Reviewed-by: Konrad Dybcio <redacted> Konrad
quoted hunk ↗ jump to hunk
arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+)diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts index d64096028ab1..eb73b992a696 100644 --- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts@@ -7,6 +7,7 @@ #include "qcom-msm8226.dtsi" #include "qcom-pm8226.dtsi" +#include <dt-bindings/input/ti-drv260x.h> /delete-node/ &adsp_region;@@ -68,6 +69,26 @@ &adsp { status = "okay"; }; +&blsp1_i2c2 { + clock-frequency = <384000>; + + status = "okay"; + + vibrator@5a { + compatible = "ti,drv2605"; + reg = <0x5a>; + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + + mode = <DRV260X_ERM_MODE>; + library-sel = <DRV260X_ERM_LIB_D>; + vib-rated-mv = <2765>; + vib-overdrive-mv = <3525>; + + pinctrl-0 = <&vibrator_default_state>; + pinctrl-names = "default"; + }; +}; + &blsp1_i2c5 { clock-frequency = <384000>;@@ -347,6 +368,13 @@ reset-pins { }; }; + vibrator_default_state: vibrator-default-state { + pins = "gpio59", "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + wlan_hostwake_default_state: wlan-hostwake-default-state { pins = "gpio66"; function = "gpio";