Re: [PATCH] dt-bindings: input: pwm-beeper: add volume
flat view
From: Rob Herring <robh@kernel.org>
Date: 2023-02-03 21:21:16
Also in:
linux-devicetree, lkml
On Wed, Feb 01, 2023 at 06:10:25PM +0100, Manuel Traut wrote:
Add an array of supported volume levels and a default volume level.
Don't send a single updated patch in a series. It breaks tools and workflows.
quoted hunk ↗ jump to hunk
Signed-off-by: Manuel Traut <redacted> --- .../devicetree/bindings/input/pwm-beeper.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml index 1ebc3a46d934..7ea2954cdd6a 100644 --- a/Documentation/devicetree/bindings/input/pwm-beeper.yaml +++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml@@ -25,6 +25,18 @@ properties: beeper-hz: description: bell frequency in Hz + volume-levels-bp: + description: > + Please note that the actual volume of most beepers is + highly non-linear, which means that low volume levels + are probably somewhere in the range of 10 to 300 (0.1-3% + duty cycle).
This tells me nothing in terms of how to use this property. The index of the array is the volume level and the value is the PWM duty cycle?
+ maximum: 5000
As this is an array, 'maximum' for the array doesn't make sense. It's a max for each entry: items: maximum: 5000
quoted hunk ↗ jump to hunk
+ + default-volume-level-bp: + description: > + The default volume level. + required: - compatible - pwms@@ -36,4 +48,6 @@ examples: beeper { compatible = "pwm-beeper"; pwms = <&pwm0>; + volume-levels-bp = <0 80 200 400 5000>; + default-volume-level-bp = <80>; };-- 2.39.1