[PATCH v4 10/11] arm: dts: qcom: mdm9615: remove invalid interrupt-names from pl18x mmc nodes
From: Neil Armstrong <neil.armstrong@linaro.org>
Date: 2022-10-21 09:10:05
Also in:
linux-arm-msm, linux-devicetree, linux-rtc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This solves the 'interrupt-names' was unexpected dtbs check error. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- arch/arm/boot/dts/qcom-mdm9615.dtsi | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 366241dee522..9d950f96280d 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi@@ -325,7 +325,6 @@ sdcc1: mmc@12180000 { arm,primecell-periphid = <0x00051180>; reg = <0x12180000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>;
@@ -345,7 +344,6 @@ sdcc2: mmc@12140000 { status = "disabled"; reg = <0x12140000 0x2000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>;
--
b4 0.10.1