On 28-02-22, 15:38, Rob Herring wrote:

Another pass at removing unnecessary use of 'allOf' with a '$ref'.

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords.

...

 .../bindings/connector/usb-connector.yaml         |  3 +--
 .../bindings/display/brcm,bcm2711-hdmi.yaml       |  3 +--
 .../bindings/display/bridge/adi,adv7511.yaml      |  5 ++---
 .../bindings/display/bridge/synopsys,dw-hdmi.yaml |  5 ++---
 .../bindings/display/panel/display-timings.yaml   |  3 +--
 .../devicetree/bindings/display/ste,mcde.yaml     |  4 ++--
 .../devicetree/bindings/input/adc-joystick.yaml   |  9 ++++-----
 .../bindings/leds/cznic,turris-omnia-leds.yaml    |  3 +--
 .../devicetree/bindings/leds/leds-lp50xx.yaml     |  3 +--
 .../devicetree/bindings/mfd/google,cros-ec.yaml   | 12 ++++--------
 .../devicetree/bindings/mtd/nand-controller.yaml  |  8 +++-----
 .../bindings/mtd/rockchip,nand-controller.yaml    |  3 +--
 .../devicetree/bindings/net/ti,cpsw-switch.yaml   |  3 +--
 .../bindings/phy/phy-stm32-usbphyc.yaml           |  3 +--

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod