On Wed, Jan 12, 2022 at 3:52 AM Dmitry Torokhov
[off-list ref] wrote:
On Tue, Jan 11, 2022 at 09:19:19PM -0500, Sean O'Brien wrote:
quoted
On Tue, Jan 11, 2022 at 12:07 PM Angela Czubak [off-list ref] wrote:
quoted
On Mon, Jan 10, 2022 at 10:02 PM Dmitry Torokhov
[off-list ref] wrote:
quoted
On Mon, Jan 10, 2022 at 08:43:28PM +0100, Angela Czubak wrote:
quoted
Hi Dmitry,
On Fri, Jan 7, 2022 at 11:07 PM Dmitry Torokhov
[off-list ref] wrote:
quoted
Hi Angela,
On Tue, Dec 21, 2021 at 07:17:38PM +0000, Angela Czubak wrote:
quoted
Add a function to switch off ABS_PRESSURE generation if necessary.
This may be helpful in case drivers want to generate ABS_PRESSURE events
themselves from ABS_MT_PRESSURE.
This needs better explanation for why it is needed. I assume this is to
use ABS_PRESSURE to report "true force" for devices. If this is correct
then I believe we should define a new flag for input_mt_init_slots()
and check it here and also use it to calculate the force across contacts
in input_mt_sync_frame().
Or did I misunderstand the point?
I would say you understood it correctly, though to my mind it is not a
static behaviour,
It should be, otherwise how will userspace know the meaning of the
event?
Fair point.
quoted
quoted
i.e. we may want to switch this kind of calculation on and off.
Are flags intended to be modified at runtime?
No.
quoted
For instance, if user decides to remove the release or press effect (previously
uploaded by them) and there is no default one per device, then we should switch
the haptic handling from kernel mode back to device mode.
Why? I think if user removes effects then they do not want to have
haptics effects. I am wondering if this whole thing made too complex.
In my mind we have following cases:
- OS does not know about these haptics devices (touchpads). They work in
device (?) mode and provide haptic feedback on their own.
- OS does know about haptics devices (that includes having both kernel
*and* userspace support for them. If one is missing then the other
should not be enabled, it is up to the distro to make sure all pieces
are there). In this case OS controls haptics effects all the time,
except:
- OS supports haptics, but switched it to device mode to allow haptics
effect playback when waking up.
Perhaps switching between modes should be a separate discussion.
Right now it seems to me that your suggestion could be that if
INPUT_PROP_HAPTIC_TOUCHPAD is set it should be followed by setting
something like INPUT_MT_PRESSURE_SUM in mt_flags, which should mean
every ABS_PRESSURE event should actually be a sum of pressures/true forces
across all slots. Does it sound right?
If so, I suppose I will implement it. It should be completely independent from
device/kernel mode and, what is more, if hid_haptic_init() fails for any reason
the pressure sum still gets calculated.
I'd say that if hid_haptic_init() fails we should not say that the
device is INPUT_PROP_HAPTIC_TOUCHPAD (if we even decide to continue with
the device instantiation, which we probably should not).
It would still be a haptic touchpad, I suppose; the fact that
initialization failed isn't going
to do anything with the device, really, rather some failure in memory
allocation etc.
If you are worried about how the userspace can be sure that
initialization succeeded,
if hid_haptic_init() succeeds then the device should report EV_FF
events, otherwise not.
From my point of view it would be also somewhat unnecessary for
hid_haptic_init()
failure to break device instantiation as it would mean that the touchpad gets
nonfunctional.
Please let me know if there are any known obstacles that should discourage us
from using the device after failed hid_haptic_init() or you have some
more thoughts on
INPUT_PROP_HAPTIC_TOUCHPAD.
quoted
quoted
Sean, is it OK for the device to keep kernel mode in the event no
default press/release
waveform is defined in the waveform list and the user removes relevant effects
(after having uploaded them)? I think it was desired to remain in the
device mode
if no such waveforms/effects are defined and, thus, I assumed that removing
following effects (in case no press/release waveforms in the waveform
list) should
trigger coming back to device mode.
Right now it seems that switching back to device mode should be
allowed only when
suspending the device.
I agree that we should switch to device-controlled mode if press/release are
not defined by the device, and userspace has not supplied alternative
waveforms for either. If we kept it in kernel-controlled mode, there would be
no effect for click/release. This can be achieved by userspace by emitting
EVIOCFFTAKECONTROL for click and release, and never sending haptic commands.
What is wrong for not having effect for press/release if userspace did
not bother to set it up? I think this is reasonably to expect that if
user enabled support for haptic touchpad in kernel they should also have
userspace that knows how to handle it. If we go with this requirement I
think we will reduce a lot of complexity.
Benjamin, Jiri, Peter, I'd like you to chime in please.
Dmitry, just to be sure, are you suggesting that kernel should not
trigger haptic feedback
at all as well?
I suppose most of the cases a haptic device will supply waveforms for
press and release in
its waveformlist (exposed in autotrigger report) and so the kernel
will use them.
I am just mentioning a case where switching back to device/autonomous
mode would be
somehow justifiable.
quoted
This also allows for the case where userspace may want to send haptics for UX
effects, while still relying on the device for traditional press and release
haptics (in the case where the device doesn't define press/release
waveforms).
Again, what is the difference between press/release and other UX
effects? They seem to be the same to me...
I suppose the userspace may want the user to feel a different
sensation at times.
For instance, let's say that user tries to click on a button/switch
that is blocked for them
(perhaps this option is not allowed by their admin?). The userspace
may want to trigger
a different haptic effect to let them know in yet another way that
their actions haven't
succeeded, something is prohibited etc.
Sean, you may have some better real-life applications, perhaps it
should be you to
explain this point more clearly.
quoted
quoted
Now, the question would be where BTN_LEFT events should be generated.
Normally it happens in hid-multitouch and I override it in hid-haptic.c
This means I calculate the pressure sum as well in hid-haptic/hid-multitouch.
Does anyone mind such behaviour?
quoted
quoted
Currently it
also means
that the driver stops generating ABS_PRESSURE events on its own and so
input-mt layer may/should be used again (i.e. mt report pointer emulation).
Anyhow, if it would be actually better to calculate the true force in
input_mt_sync_frame()/input_mt_report_pointer_emulation()
(I suppose I wanted to say I would implement it in such case)
Thanks.
--
Dmitry