@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/da9063-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OnKey driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+  This module is part of the DA9063 MFD device. For more details, see
+  Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+  The OnKey controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  This node defines the OnKey settings for controlling the key
+  functionality of the device. The node should contain the compatible property
+  with the value "dlg,da9063-onkey".
+
+properties:
+  compatible:
+    const: dlg,da9063-onkey
+
+  dlg,disable-key-power:
+    description: |
+      Disable power-down using a long key-press. If this
+      entry exists the OnKey driver will remove support for the KEY_POWER key
+      press. If this entry does not exist then by default the key-press
+      triggered power down is enabled and the OnKey will support both KEY_POWER
+      and KEY_SLEEP.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false

@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9063 consists of a large and varied group of sub-devices (I2C Only):
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9063-regulator        :               : LDOs & BUCKs
-da9063-onkey            :               : On Key
-da9063-rtc              :               : Real-Time Clock (DA9063 only)
-da9063-watchdog         :               : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9063(L) regulators are bound using their names listed below:
-
-    bcore1    : BUCK CORE1
-    bcore2    : BUCK CORE2
-    bpro      : BUCK PRO
-    bmem      : BUCK MEM
-    bio       : BUCK IO
-    bperi     : BUCK PERI
-    ldo1      : LDO_1	(DA9063 only)
-    ldo2      : LDO_2	(DA9063 only)
-    ldo3      : LDO_3
-    ldo4      : LDO_4	(DA9063 only)
-    ldo5      : LDO_5	(DA9063 only)
-    ldo6      : LDO_6	(DA9063 only)
-    ldo7      : LDO_7
-    ldo8      : LDO_8
-    ldo9      : LDO_9
-    ldo10     : LDO_10	(DA9063 only)
-    ldo11     : LDO_11
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
-  the DA9063 only. The RTC is not present in DA9063L. There are currently
-  no entries in this binding, however compatible = "dlg,da9063-rtc" should
-  be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
-  functionality of the device. The node should contain the compatible property
-  with the value "dlg,da9063-onkey".
-
-  Optional onkey properties:
-
-  - dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press. If this entry does not exist then by default the key-press
-    triggered power down is enabled and the OnKey will support both KEY_POWER
-    and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
-  with the DA9063 and DA9063L. There are currently no entries in this
-  binding, however compatible = "dlg,da9063-watchdog" should be added
-  if a node is created.
-
-
-Example:
-
-	pmic0: da9063@58 {
-		compatible = "dlg,da9063"
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		wdt {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-
-		regulators {
-			DA9063_BCORE1: bcore1 {
-				regulator-name = "BCORE1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-boot-on;
-			};
-			DA9063_LDO11: ldo11 {
-				regulator-name = "LDO_11";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-

@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+  DA9063 consists of a large and varied group of sub-devices (I2C Only):
+
+  Device                   Supply Names    Description
+  ------                   ------------    -----------
+  da9063-regulator        :               : LDOs & BUCKs
+  da9063-onkey            :               : On Key
+  da9063-rtc              :               : Real-Time Clock (DA9063 only)
+  da9063-watchdog         :               : Watchdog
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - dlg,da9063
+              - dlg,da9063l
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  regulators:
+    $ref: ../regulator/da9063-regulator.yaml
+
+  onkey:
+    $ref: ../input/da9063-onkey.yaml
+
+  rtc:
+    $ref: ../rtc/da9063-rtc.yaml
+
+  watchdog:
+    $ref: ../watchdog/da9063-watchdog.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/irq.h>
+
+        i2c1 {
+                #size-cells = <0>;
+                #address-cells = <1>;
+
+                pmic0: da9063@58 {
+                        compatible = "dlg,da9063";
+                        reg = <0x58>;
+                        interrupt-parent = <&gpio6>;
+                        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+                        interrupt-controller;
+
+                        rtc {
+                                compatible = "dlg,da9063-rtc";
+                        };
+
+                        wdt {
+                                compatible = "dlg,da9063-watchdog";
+                        };
+
+                        onkey {
+                                compatible = "dlg,da9063-onkey";
+                                dlg,disable-key-power;
+                        };
+
+                        regulators {
+                                DA9063_BCORE1: bcore1 {
+                                        regulator-name = "BCORE1";
+                                        regulator-min-microvolt = <300000>;
+                                        regulator-max-microvolt = <1570000>;
+                                        regulator-min-microamp = <500000>;
+                                        regulator-max-microamp = <2000000>;
+                                        regulator-boot-on;
+                                };
+                                DA9063_LDO11: ldo11 {
+                                        regulator-name = "LDO_11";
+                                        regulator-min-microvolt = <900000>;
+                                        regulator-max-microvolt = <3600000>;
+                                        regulator-boot-on;
+                                };
+                        };
+                };
+        };

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/da9063-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+  This module is part of the DA9063 MFD device. For more details, see
+  Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  This node defines the settings for the LDOs and BUCKs.
+  The DA9063(L) regulators are bound using their names listed below:
+
+  bcore1    : BUCK CORE1
+  bcore2    : BUCK CORE2
+  bpro      : BUCK PRO
+  bmem      : BUCK MEM
+  bio       : BUCK IO
+  bperi     : BUCK PERI
+  ldo1      : LDO_1	(DA9063 only)
+  ldo2      : LDO_2	(DA9063 only)
+  ldo3      : LDO_3
+  ldo4      : LDO_4	(DA9063 only)
+  ldo5      : LDO_5	(DA9063 only)
+  ldo6      : LDO_6	(DA9063 only)
+  ldo7      : LDO_7
+  ldo8      : LDO_8
+  ldo9      : LDO_9
+  ldo10     : LDO_10	(DA9063 only)
+  ldo11     : LDO_11
+
+  The component follows the standard regulator framework and the bindings
+  details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+properties:
+  compatible:
+    const: dlg,da9063-regulator
+
+required:
+  - compatible
+
+additionalProperties: false

@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/da9063-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTC driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Support Opensource <support.opensource@diasemi.com>
+
+description:
+  This module is part of the DA9063 MFD device. For more details, see
+  Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+  The RTC controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  This node defines settings for the Real-Time Clock associated with
+  the DA9063 only. The RTC is not present in DA9063L. There are currently
+  no entries in this binding, however compatible = "dlg,da9063-rtc" should
+  be added if a node is created.
+
+properties:
+  compatible:
+    const: dlg,da9063-rtc
+
+required:
+  - compatible
+
+additionalProperties: false

@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/da9063-watchdog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+  This module is part of the DA9063 MFD device. For more details, see
+  Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+  The watchdog controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  This node defines settings for the Watchdog timer associated
+  with the DA9063 and DA9063L. There are currently no entries in this
+  binding, however compatible = "dlg,da9063-watchdog" should be added
+  if a node is created.
+
+properties:
+  compatible:
+    const: dlg,da9063-watchdog
+
+required:
+  - compatible
+
+additionalProperties: false